Section Menu

See More Upcoming Auctions

NEW 2009 - ESL / ASEPTIC - Processing & Packaging Equipment (Available for Immediate Sale!)
GARELICK FARMS - Dairy Processing, Filling and Packaging Auction (LOCATION: Bangor, ME, DATE: June 4 - 2013)
MISCOE SPRINGS BEVERAGE COMPANY - Bottled Water Filling & Packaging Auction (LOCATION: Mendon, MA DATE: June 6 - 2013)
CHAMPION PHOTO-CHEMISTRY - Photo Chemical Processing, Filling & Packaging Auction (ONLINE AUCTION ONLY - Starting - June 3rd / Ending - June 7th)
OAK FARMS DAIRY - Large - Dairy Processing, Filling and Packaging Plant Auction (LOCATION: Shreveport, LA, DATE: June 20 - 2013)
LIBERTY DAIRY - Large - Fluid Milk Filling, Packaging & Bottle Making Auction (LOCATION: Evart, MI DATE: July 11, 2013)
FORMERLY UNILEVER - MAJOR ICE CREAM PRODUCTION FACILITY - Equipment Auction / Real Estate (LOCATION: Hagerstown, MD, DATE:July/August, 2013)
BOB EVANS FARMS TURNKEY MANUFACTURING PLANT! Springfield. OH (For Immediate Sale!)
BOB EVANS FARMS TURNKEY MANUFACTURING PLANT! Bidewell, Ohio (For Immediate Sale!)

BOTTLE MAKING, FILLING & PACKAGING EQUIPMENT AUCTION!

LOCATION: Irvine, CA DATE: Tuesday, October 2nd 2012 @ 9:30 am

17842 Cowan Street | Irvine, CA 92614 (Get A Map)

SURPLUS TO THE ONGOING NEEDS OF ONE OF THE LARGEST MAJOR WATER BOTTLING COMPANY IN THE USA!!

PHOTOS & MORE DETAIL - NOW AVAILABLE!!

Click Here for Auction Catalog! Updated 9/20!

No parking onsite before 8 am on Inspection Day and Auction Day. Pre-Auction Registration begins at 8:15 am!

THIS AUCTIONS FEATURES A $6,000,000 AT COST - COMPLETE PET INJECTION MOLDING, BLOW MOLDING, FILLING & PACKAGING LINE LOCATED IN IRVING CA - FEATURING:

PET INJECTION MOLDING / BLOW MOLDERS:
(3) NISSEI INJECTION / BLOW MOLDERS, RESIN HANDLING EQUIPMENT INCLUDING SILO, (5) AEC WHITLOCK RESIN DRYERS, GRANULATOR, FREON PROCESS COOLING SYSTEM WITH PKG CHILLER, WATER TOWER, BELLISS & MORCOM HIGH PRESSURE AIR COMPRESSOR SYSTEM

PET COMPLETE FILLING & PACKAGING LINE INCLUDES THE FOLLOWING EQUIPMENT:
LANFRANCHI BOTTLE STORAGE SYSTEM WITH CONVEYOR, BOTTLE UNSCRAMBLER, KRONES SENSOMETIC 44-VALVE MONO BLOC ROTARY FILLER / CAPPER, CAP HOPPER, FILTEC LEVEL INSPECTOR, ALLIANCE AIR KNIFE, DOMINO LASER CODER, KRONES CANMATIC 18-STATION ROTARY LABELER, KAYAT CASE PACKER, BARRY WEHMILLER SHRINK WRAPPER / TUNNEL, VON GAL PALLETIZER, WULFTEC PALLET WRAPPER, BEVCO ACCUMULATION TABLE, ALL SUPPORTING CONVEYORS INCLUDING AIRVEYOR, BOTTLE CONVEYOR, CASE CONVEYOR & POWERED BY ALLEN BRADLEY PLC CONTROLS

OTHER ADDITIONAL EQUIPMENT LOCATED IN CA - 2005 WAYNE CASE ERECTOR & 2001 ELLIOTT BOXER

ALLENTOWN PA - FILLING & PACKAGING LINE - INCLUDES THE FOLLOWING EQUIPMENT:
2007 / 08 - MFG - 1 & 3 GALLON PET FILLING LINE - INCLUDING - LINKER 30 VALVE MONO BLOC ROTARY FILLER WITH 10 STATION SCREW CAPPER, CRYOTECH DOSING SYSTEM, LINKER ELEVATED S/S CAP HOPPER, LABEL AIR 2- STATION INLINE LABELER, WAYNE CASE PACKER, FKI HIGH LEVEL PALLETIZER, RELATED LINE CONVEYOR SYSTEM INCLUDING BOTTLE CONVEYOR, CASE CONVEYOR, AIR CONVEYOR, ALLEN BRADLEY PLC CONTROL PANELS - VERY LOW HOURS ON EQUIPMENT - NOTE: LINE ONLY OPERATED FOR ONE YEAR!!

ADDITIONAL SURPLUS EQUIPMENT LOCATED IN ALLENTOWN PA INCLUDING THE FOLLOWING: 2009 BREDDO 400 GALLON LIQUIFIER; 2009 SKID MOUNTED CIP SYSTEM, 2009 TEA BLEND CONTROL PANEL, (2) 2009 RYSON SPIRAL CASE CONVEYORS, 10,000 GAL EQUALIZATION TANK, 2011 BALLY MODULAR COOLER, 2009 DYNAFLAME 100 HP WATER HEATER & MORE!!!

Items Listed In Auction

IRVINE CA - COMPLETE PET INJECTION MOLD, BLOW MOLD, FILLING & PACKAGING LINE - (NI)

INJECTION/ BLOW MOLDERS - (NI)

Injection /Blow Molders – Automatic One – Step Bottle Making Machines

(2) Nissei Injection / Blow Molders, Model PB170/110-32/8, S/N 209C8027 & 219C8037 - Fully Outfitted with PLC Controls, (Currently Set Up to Run 12 oz PET Bottles - Additional Change Parts - Set Up with 26.7 mm Short Screw Cap Finish, (Rated Aprox. Capacity - 7,550 BPH and 8,224 BPH)

Nessei Injection / Blow Molder, Model PF8-4B, S/N 209C4087 – Fully Outfitted with PLC Controls, (Currently Set Up to Run 16.9 oz PET Bottles - Additional Change Parts - Set Up with 26.7 mm Short Screw Cap Finish, (Rated Aprox. Capacity – 2,000 BPH)

Additional Blow Molding Equipment Including: Large Assotment of Nessei Spare Parts & Change Parts

RESIN HANDLING EQUIPMENT - (NI)

Cone Bottom Resin Silo - Aprox. - 12’ W x 30’ H

(5) AEC Whitlock Resin Dryers, Model WD225 & Other with Resin Hoppers

AEC Resin Granulator - Just Added!!

Freon Package Chiller with (2) Copeland Compressors - Injection / Blow Mold Chilling System

AEC Water Tower with Holding Tank & Pumps

Russel 4-Fan Evaporator

HIGH PRESSURE AIR COMPRESSOR SYSTEM - (NI)

1998 Belliss & Morcom 250 hp Skid Mounted High Pressure Recip. Air Compressor, Model VH15H3N, S/N 8879 with Hankinson Refrigerated Air Dryer & Vertical Receiver, (Note: From ID Plate - 45 Bar - Equal - Aprox. 650 psi)

LOW PRESSURE SCREW AIR COMPRESSOR PACKAGE - JUST ADDED!!! - (NI)

2010 Ingersoll Rand 200 hp Screw Air Compressor, Model IRN20 0H-OF, S/N TN0643U10190, Max. Discharge Pressure 150 psig, 460 V, 3 Phase, (Water Cooled, Oil-Free Air), LOW HOURS!! - LOT #57

2010 Ingersoll Rand Air Dryer, Model #NVC800A 40N, S/N 346748, Refrigerant R404A, 460 V, 3 Phase - LOT #58

2010 Silvan Indus. Vertical Receiver, (Aprox. 12 ft. H x 48 inch W), S/N 636243, MAWP 155 psi at 400 Degree F - LOT #59

BOTTLE ACCUMULATION SYSTEM, CONVEYOR HANDLING SYSTEM & UNSCRAMBLER - (NI)

Lanfranchi S/S Bottle Accumulation System with Bottle Handling Conveyor, Belt Driven, Enclosed with Belt Conveyor & PLC Controls

Lanfranchi S/S Bottle Unscrambler, Model M196A002346, with PLC Controls

44-VALVE MONOBLOC ROTARY FILLER - (NI)

Krones 44- Valve Monobloc Rotary Filler, Type Sensometic, with Zalkin 11- Head Rotary Capper Model FZ974, with Feeder Model U1200 – Fully Outfitted with Neck Handling, PLC Controls & Change Parts, (Note: Bottles Enters Machine from the Left), (Note: Set Up to Run 12 oz. PET Bottles @ 300 BPM, Set Up with 26.7 mm Short Screw Cap Finish, Additionally Reported to us this Machine is Capable of Filling 0.5L & Smaller Bottles at Speeds in Excess of Aprox. 500 BPM - Will Also Fill and Cap 1-L Bottles at Aprox. 220 BPM and 1.5L Bottles at Aprox. 150 BPM) - Click Here for Filler Specs - http://www.krones.com/downloads/sensometic_vpgw_e.pdf

Bin Elevated S/S Cap Hopper

FILL LEVEL INSPECTOR - (NI)

Filtec Inline Level Inspector, Model FT-50

LASER CODER - (NI)

Domino Laser Coder, Model DDC3, with Head & Blower System

LABELER - (NI)

Krones 18-Station Rotary Labeler, Model Canmatic, (600 - BPM Cut and Stack - Full Wrap Hot Melt Labeler)

CASE PACKER & SHRINK TUNNEL - (NI)

2005 Kayat Case Packer, Model PTF-28, (24-Wrap Around - Wraps 28 Trays Per Minute)

Barry Wehmiller S/S Shrink Tunnel, Model SA27-808

PALLETIZER & PALLET WRAPPER - (NI)

Von Gal Automatic Low Level Palletizer, Model LOPAL-MK11 4840-LH-SEPD, (Rated at 20+ Trays Per Minute)

Wulftec Pallet Wrapper, Model WCA-200

ACCUMULATION TABLE & CONVEYOR SYSTEMS & AIR KNIFE - (NI)

Bevco 10 ft. L x 5 ft. W Bi-Directional All S/S Accumulation Table

S/S Airveyor Conveyor System with Drives, Combiners & Controls

S/S Bottle Conveyor System with Drives, Combiners & Controls

Case Conveyor System

Alliance S/S Air Knife

ADDITIONAL PACKAGING - LOCATED IN CA - (NI)

2001 Elloitt Case Erector / Sealer, Model 2000 SL, S/N 04-0901, with Magazine, Nordson Gluer, Allen Bradley PLC Controls & Spare Parts,(Formerly Used with a 2.5 Gallon HDPE Line)

2005 Wayne Case Erector / Sealer, Model CE2100-HM, S/N 52899-3274, with Nordson ProBlue Gluer & PLC Controls & Spare Parts – (Formerly Used with a HDPE 1 - Gallon Line)

EQUIPMENT LOCATED IN - ALLENTOWN, PA - (NI)

1 & 3 GALLON PET FILLING & PACKAGING LINE INCLUDING: - (NI)

30-VALVE MONOBLOC ROTARY FILLER - (NI)

2007 Linker 30 - Valve Monobloc Rotary Filler / Screw Capper, Model FC30-10G-1Gal, S/N P060996-98, with 10- Station Screw Capper, Cap Feeder with Chute, Allen Bradley PLC Controls, (Note: Set Up to Run 1 & 3 Gallon PET Bottles with 43 mm Screw Cap Finish)

2007 Cryotech Dosing System with Digital Controls

2007 Linker Bin Elevated S/S Cap Hopper

IN-LINE LABELER - (NI)

2007 Label Aire 2- Station Labeler, Model 3115

CASE PACKER - (NI)

2007 Wayne Automation Corp. Case Packer, Model WR-25-CM - (Formerly Operating on 1 Gallon Pet Bottles In 6-Pack Wrap Around Box)

HIGH LEVEL PALLETIZER SYSTEM - (NI)

2007 FKI Logistics High Level Palletizer System, Series A910, with PLC Controls, (Formerly Operating on 1 & 3 Gallon Pet Bottles @ Aprox. 90 Cases Per Minute)

(8) Hytrol Pallet Bed Power Roller Conveyor Systems

AIR CONVEYOR, BOTTLE CONVEYOR & CASE CONVEYOR - (NI)

2007 - 100’s of Feet of S/S Air Conveyor with Blowers

2007 - 100’s of Feet of S/S Bottling Conveyor with Drives

2009 - 100’s of Feet of Sidel S/S Case Conveyor with Drives

Hytrol Case Conveyor with Drives

Conveyor Control Panels – Outfitted with Allen Bradley PLC Controls with Touch Pad Displays, VFD’s, Starters & Solenoids

ADDITIONAL MAJOR EQUIPMENT LOCATED IN ALLENTOWN, PA - (NI)

LIQUIFIER - (NI)

2009 Breddo 400 Gal. S/S Liquifier, Model LDT D.526947.3 09019, (Diam. 4 ft. x ft. x 42” Sidewall) - NOTE: LIKE NEW CONDITION!!! VERY LOW HOURS ON MACHINE!!

CIP SYSTEM - (NI)

Skid Mounted CIP System with Fedlmeier Aprox. 150 Gal. S/S Tank, Plate Heat Exchanger, Centrifugal Pumps, Valves, Endros Hauser Flow Meter & Water Treatment Controls