(6) Feldmeier 5,500 Gal. S/S Juice Tanks including (2) with Wide Sweep Agitation; (23) Alfa Laval 3” Mix Proof Air Valve Cluster; Flow Meter, Sensors, Transmitters, WCB Positive Displacement Pump; S/S Platforms and Related Items

Fluidor Dump System Drum, Model DAPS, S/N 464-FE-2008 with S/S Conveyor, Drum Dumper, Bag Squeezer and Control Panel.  Mounted on Load Cells with Controls.  Also Equipped with Pump (40 Drums per hour Capacity)

(2) Feldmeier 1,600 Gal. S/S Blend Tanks, S/N 59 and 60-08, 316 Stainless with Bottom Agitation, Butterfly Air Valves, Instrumentation and S/S

Lift to Scale Platform with Boldt Frozen Block Breaker, S/N BFO-08-027.01 with Elevating Auger Conveyor System into FAM Inline Cutter/Slicer/Cubes, Model IAC-3D, S/N 7172/208.  (Capable of Producing Slices, Strips or Dices), GPI 2,500 Litre Mixing/Slurry Tank with Horizontal Mixer, (2) Heating Zones, Positive Displacement Pump, Magnetic Filter, Hot Water Set, Instrumentation S/S Platforms, Controls and Related Items

Holtec Nitrogen Generator System, Model HPN-900, Set-up with 2-Skids,  with Clemco Vessels, Controls, Nitrogen Storage Tank, All Necessary Valves, 316 S/S Tubing, Allen Bradley Micrologix 1100E and Related

WCB 4” Positive Displacement Pump, Model 22022 including S/S Pipe, Air Valves and Line Items
(2) 200 Gal. S/S Dry Blend Tanks with Brawn Agitators, S/S Platforms, WCB Pump, S/S Pipe, Valves and Line Items, Control Panel with VFD’s, Kice Dust Collector

Stork Steri-Juice Processing System Type 800SC

20,000 Litre Aseptic Holding Tank, S/N N.246.03

Balance Tank and 8,000 Litre per hour Capacity Deareation System with Cavity Pumps

PosiMat Bottle Dumper with Feed and Dual Orienter, Model ACCESS, Series 2XN-20 with Airveyor into Filler

Stork Aseptic Filler System, Model ASEP-TEC 1612, S/N N.00246.01 including (16) Filling Lines with Nominal Capacity of 24,000 Bottles per hour @ 200 ml, Equipped with Nitrogen Dosing Systems, Beckhoff PC Controls, Air Filtration and Sterilization System, CIP System, Fords Foil Press, Model 330MD, S/N 21344

(2) Heuft Fill, Height and Leak Detectors, Type Mono-Pusher and Squeezer and Scan Trac X-Ray Imagining Unit, Model 215, S/N 53795

Fowler Zalkin Automatic Capping Machine, Model CAS/18/640/N6, S/N 24418 with 18-Heads including Cap Dispensing System, Elevator and Allen Bradley PLC

Sentry Bottle Conveyor Systems from Filler thru Inspection Units to Sleever

Sentry Bottle Conveyor System from Sleever to Zalkin Capper with Air Knife and Transfer Rails

Sentry Bottle Conveyor System from Zalkin Capper to Dimac Casers including 4-Laners

Fuji Intersleeve Labeler, Model SA4300DE with Steam Shrink Tunnel with 6-Sections, (2) Sleeve Application Modules, Extended Infeed and Outfeed, (2) Film Feed Modules and Controls

Fuji Intersleeve Labeler, Model SA4300DE with Steam Shrink Tunnel with 6-Sections, (2) Sleeve Application Modules, Extended Infeed and Outfeed, (2) Film Feed Modules and Controls

(2) Dimac Multi-Packers, Model GREEN PLANET including High Speed Lane Divider, Nordson Hot Melt Gluer, Conveyor, (2) Rytec Spiral Elevating Conveyors and Allen Bradley PLC Controls

(2) FKI Logistex Alvey A-881 Palletizers, Model 881 CPL Compacklogix L31 (50 Cases per minute) with Dimac Robo Pac Pallet Wrapper, Model Helix HS40 and Pallet Conveyors, Both Powered with PLC Controls

(3) Video Jet Ultra High Speed Excel 170i Coders (1-Bottle and 2-Sleeves); (2) Domino Box Coders, S/N A0E03555 and (4) Panther Model 2000 Labelers

(2) 150 + Case Conveyor Lines Feeding into Palletizer

Scada Control System utilizing Allen Bradley Control Logix Processor including Controls for Processing, Batching Tank Inventory, CIP Systems and Other Controls also includes Square D 4-Panel Motor Control Center, 480 V, 60 hz, 250 Amp Breaker including (11) VFD’s

Cameron 500 hp Turbo Oil-Free Air Compressor, Model TA3000, S/N CB16027, Rated at 2463 LCFM @ 125 psi with S/S Heavy Wall Air Lines,  Benshaw Solid State Starter, Eaton Air Dryer System, Receiver, Camlink PLC Controller Panel with Allen Bradley Components

Water Cooling and Circulating System including (2) 40 hp Pumps and (1) Additional Pump and Related Components

Thermotech Press, Circulating System including (3) Pumps (2 - 40 hp), Water Tower and Circulating System

(2) 6-Bank Water Filtration Systems with Circulating Systems

2-Tank CIP System with 700 Gal. 316 Stainless Detergent Tank, 300 Gal. 304 Stainless Water Tank, Pro-Flow Plate Press, Chemical Feed System, Flow Meters, Transmitters, Gauges, Touchpad System with Controls, CIP Piping with Alfa Laval Air Valves and Line Items

Dosing Pump with Plastic Tank for Processor, CIP and Single Tank Water Softener System

(3) BAC 4-Fan Refrigeration Blowers and (1) Single Refrigeration Fan

General Plant items including: Pallet Racking, Philadelphia Tram-Rail Baler, Cabinets, Tables and Related Fixtures and Plant Furniture