(4) S/S Silos
Walker 50,000 Gal. Jacketed S/S Silo - Complete with Aluminum Clad Exterior, (Approximately 12 ft. Dia. x 60 ft. L)
           
Walker 40,000 Gal. Ammonia Refrigerated S/S Silo, S/N VSHT4132R – Complete with Horizontal Agitator, Tri-Clover Air Valve, 288 sq.ft. Jacket, 150 psi (Approximately 11 ft. W x 55 ft. H)
           
APV 25,000 Gal. Ammonia Refrigerated S/S Silo, S/N A8929 – Complete with Horizontal Agitator, Tri-Clover Air Valve, 150 psi Jacket (Approximately 35 ft. H x 11 ft. W)
           
Walker 25,000 Gal. Refrigerated Ammonia S/S Silo, S/N 2203 – Complete with Horizontal Agitator, Tri-Clover Air Valve (Approximately 36 ft. H x 11 ft. W)
         
(8) Horizontal S/S Tanks
Walker 12,000 Gal. Horizontal Ammonia Refrigerated S/S Tank – Complete with Dual Vertical Agitator, Air Valve and S/S Front, (Approximately 104” W x 30 ft. L)
         
1997 Walker 7,500 Gal. Horizontal Ammonia Refrigerated S/S Tank, Model 12188, S/N HHT-6509R – Complete with 48 sq. ft. Jacket Area, 150 psi, Dual Vertical Agitator, Air Valve, S/S Front, (Approximately 104” W x 18 ft. L)
         
Mueller 6,000 Gal. S/S Glycol Refrigerated Tank, Model SHW, S/N D-32465-1 – Complete with S/S Front, Vertical Agitator, Sprayball, Tri-Clover Air Valve (Approximately 16 ft. L x 100” W)
         
2000 Walker 6,000 Gal. Horizontal Ammonia Refrigerated S/S Tank, Model HHT, S/N SPG-21824 – Complete with S/S Front, Air Valve, Dual Vertical Agitator, Dual Sprayball, 40 sq.ft. Jacket, 150 psi Working Pressure, 304 Stainless, Tank Level System, (Approximately 112” W x 12 ft. L)
           
Heil Aprox. 6,000 Gal. Horizontal S/S Milk Dump Tank, S/N 912564, Complete with 150 psi, Ammonia Jacket, Horizontal Agitator, Tri-Clover Pump (Approximately 16 ft. L x 94” W)
         
2000 Walker 4,000 Gal. Horizontal Ammonia Refrigerated S/S Tank, Model HHT, S/N SPG-21823 – Complete with 50 sq.ft. Jacket Area, 150 psi, 304 Stainless, Vertical Agitator, Sprayballs, Tri-Clover Air Valves and S/S Front, (Approximately 104” W x 10 ft. L)
           
(2) DCI 4,000 Gal. Horizontal Ammonia Refrigerated S/S Tanks, S/N JS-2438-A (PT #9) and S/N JS-2438-B (PT #8) – Complete with Vertical Agitator, Sprayballs, Tri-Clover Air Valve and S/S Front, (Approximately 104” W x 10 ft. L)
         
Sucrose/Sugar Tank
6,000 Gal. Vertical Sucrose/Sugar Tank – Complete with UV System, Bottom Mounted Electric Heater, Aluminum Clad, Epoxy Lined, Insulated (Approximately 16 ft. 3” H x 10 ft. W)

Additional Tank
Cherry Burrell 2-Compartment at 250 Gal. Portable S/S Tank, Model UAMS250R, S/N 117 with Tri-Clover Plug Valve
           
(7) Processors
(2) 2005 Mueller Late Model Approximately 2,000 Gal. Dome-Top S/S Processors, Model PCP, S/N 334129-1 (BM #6) and S/N 334129-2 (BM #2) – Complete with Concave Bottom, Side and Bottom Sweep Agitator, Baffle, Sprayballs, 12.5/ 12.3 hp 2-Speed Agitator, Stainless Exterior Bottom, Design Temp. 250 Degree F Steam and Water, (Approximately 100” W x 138” H)
           
Cherry Burrell 2,000 Gal. Dome-Top S/S Processor, Model EPDP, S/N 2000-67-1450 – Complete with Bottom and Side Sweep Agitator, Sprayball, Stainless Exterior Bottom, (Approximately 12 ft. H x 88” W)
         
(4) Crepaco 1,500 Gal. Dome-Top S/S Processors, S/N C-2693 (BM1), S/N 1500-9730 (BM3), S/N D-4000 (BM4) and S/N C-2694 (BM5) – Complete with Bottom Side Sweep Agitator, Baffle, Sprayball, Most 1.5 / ¾ hp 2-Speed Agitator, (Most Tanks Approximately 115” H x 94” W)
         

Batch System Complete with DCI 1,900 Gal. Dome-Top Cone-Bottom Processor, S/N 86-D-34177-A with Bottom and Side Sweep Scrape Surface Agitator, SEW Euro Drive, 12.2/15.5 hp 2-Speed Agitator
         
Walker 1,000 Gal. Dome-Top S/S Blend Tank, Model Blend, S/N 3511 with 304 Stainless, Concave Bottom, Bottom Sweep Agitator, Baffle, Sprayball, Mounted on Load Cells with Mettler Toledo Read-Out, Tri-Clover 7.5 hp Centrifugal Pump with Air Valves, Related Piping and S/S Platform
         

APV 5,000 GPH HTST System with Press, Model R51, S/N 21567 – Complete with (2) Dividers, (294) Plates, Tri-Clover 2” Flow Diversion Valve, 3” Nested Holding Tube, S/S Shell and Tube Heat Exchanger with Hot Water Set, S/S Balance Tank, Tri-Clover Air Valves with Related Piping, Related Pumps with Process Controls (NOTE: Recently Replaced Plates and Gaskets)
           
2006 APV 3,500 GPH HTST System with Press, Model R51T, S/N 20063003000379 – Complete with (2) Dividers, (205) Plates, Tri-Clover 2” Flow Diversion Valve, 3” Nested Holding Tube, S/S Shell and Tube Heat Exchanger with Hot Water Set, S/S Balance Tank, Tri-Clover and Other Air Valves with Related Piping, Related Pumps with Process Controls
Buttermilk Process - 40 ft. L 3” 12-Loop S/S Holding Tube System
           
2000 AGC Approximately 1,000 GPH Cream System with Press, Model PROHX-SH, S/N 00196 – Complete with (71) Plates, Balance Tank, Tri-Clover Air Valves and Fristam High Shear Pump, Model FKL25, S/N 003389
         
(3) APV 26” H Chill Presses, Model SR15S, S/N 32037 – (30) Plates; S/N 23404-1 – (40) Plates and S/N 23404-2 – (41) Plates
         

Westfalia CIP Separator, Model MSA160-01-076, S/N 1653966 – Complete with Balance Tank, Allen Bradley Controls with Panelview Display, Related Valves with Spare Rebuilt Clutch including Service Tools
             

Federal 21-Valve Rotary Filler, S/N 1075G215RA594 with Square 32 oz., Half Gal. and Gal. Change Parts – Complete with 5-Head Snap Capper, Vibratory Cap Feeder with Stand and Tri-Clover Air Valve
         

Hundreds of Feet of Gallon & Half Gallon Installed Aluminum Jug Conveyor System Including 270 ft. L Alpine System Including Drives Straight Sections, Bends, Inclines & Controls (Running from Debagging Table thru Filling Room)
             
2001 Customs Metal Design 11 ft. L x 4 ft. W Jug Debagging Table, Model SDA-1000RL, S/N SD-5047-6-01 with Controls
           
53” L x 48” W Manual S/S Debagging Table
         
Conair 98,000 lb. Resin Silo, S/N 10174-1 – Approximately 10 ft. W x 40 ft. H
         

Cherry Burrell H100 Half Gal. Carton Filler, S/N 3129 with 2-Lanes
         
Cherry Burrell Nep210A Half Gal. and Small Section Carton Filler, S/N 1117
         

2003 Cannon Gal./Half Gal. All S/S Pneumatic Caser, Model 110-1081705, S/N 110-14-69 – Complete with Single or Dual Infeed, Single Tier, 1-Head Caser or Corrugated Boxes with Allen Bradley Micrologistics 1200 PLC Controller (Operated with H100 Filler)
             
2001 Cannon Qt./Half Pint/SCS All S/S Pneumatic Caser, S/N 120-1436 – Complete with Single or Dual Infeed, Multi-Tier 1 or 2 Head, Works on Cases or Corrugated Boxes with Allen Bradley SLC501 PLC Controller (Operated with NEP #2 Filler)
         
Cannon Qt./Half Gal./Half Pint All S/S Hydraulic Caser, Model CC810MT-P, S/N 1259 – Complete with Allen Bradley SLC150 PLC Controller (Operated with NEP #1 Filler)
       
Cannon S/S Hydraulic Caser, Model CC810MT-P, S/N 1154, Single Head with Allen Bradley SLC150 PLC Controller (Operated with Q7 Filler)
         
Cannon Single Head Hydraulic Caser, Model CG810MT with Allen Bradley SLC150 PLC Controls (Operated with Federal Filler)
           

(2) Continental 10 ft. H x 18 ft. L All S/S Case Washers, S/N D30852 and S/N D30802 – Complete with Circulating Pumps, Support Walk Platform, (2) Top-Out Hydraulic Case Destackers including (1) All S/S Cannon, Model TOUS19395-03, S/N 780
         
Hundreds of Feet of Above & Ground Level Case Conveyor System - As New as 2001 Purchased with New Cooler Project - Including Some Sections with All S/S Pans, Case Chain Including Excello Flex Bar, Bends, Curves, Lane Stops, Micro Switches, (12) Dairy Conveyor Above Ground Case Drives – from 5 hp to 10 hp, (3) Edemeyer Case Pushers, Cannon Hydraulic All S/S Case Stacker with Allen Bradley SLC 5/01 PLC Controller, (3) Additional Cannon Hydraulic Case Stackers with Allen Bradley SLC150 PLC Controller
           
(4) Hydraulic Pumps with Reservoirs Including Racine 15 hp, (2) 20 hp and (1) 30 hp
         
Large Assortment S/S Product Conveyor Sections – Most 3-1/4” W – Complete with Drives, Straight Sections and Bends
       

Perma San 3- Tank Raw CIP System Complete with 5 ft H x 48” W Tanks, Ampco Centrifugal Pump,  2006 Scherping 10 ft. L S/S Shell and Tube Heat Exchanger, Tri-Clover Air Valves with Related Piping, Direct Logistics 205 PLC Controller and Anderson AJ300 Chart Recorder
           
Skid-Mounted CIP System – Complete with 24” H x 30” W S/S Tank with Tri-Clover Approximately 10 hp Centrifugal Pump, 5 ft. L S/S Shell and Tube Heat Exchanger, Allen Bradley SLC500 PLC Controller with Panelview 550 Read-Out
           

Centrifugal Pumps
(13) Tri-Clover 1 hp to 5 hp -  Most Models C216 and C218, Some Portable and Some with All S/S Motors; (3) Ampco 10 hp to 25 hp Centrifugal Pumps
             
Positive Displacement Pumps
Waukesha Size 130, S/N 8859SS with 3” Clamp Type S/S Head and Reliance Drive; APV with 3” S/S Head and Variable Speed Drive
             
2” Tri Clover Air Valve Cluster
39-Valve 761 Series; 49-Valve 361 Series; 19-Valve 361 Series; 9-Valve 361 Series & 5-Valve 361 Series
           
S/S Piping, Valves & Sanitary Fittings
100’s of feet 1-1/2” to 3” Installed and Uninstalled S/S Process Piping with Large Assortment of Tri-Clover and Other Various Air Valves, Check Valves, Plug Valves, On – Line Filters, S/S Clamps, Ball Valves, Hangers, Large Assortment of Sanitary Fittings Including Elbows, T’s, Reducers & More
         
Milk Receiving Bay
Complete with 15 ft. L x 36” W x 5 ft. H S/S Constructed Walk Platform with Tanker Sprayball Mounted on an Electric Hoist with Transfer Hoses, Retractable Hose Reels and Safety Balancer System, Couch Eng. Transfer Hoses
           
200,000 lb. Truck Scale
Complete with 10 ft. W x 60 ft. L Pit Mount Platform, Mettler Toledo Digital Head, Model IND560, S/N 00179466BG with Epson Printer (Installed 2005)
           

(5) Ammonia Reciprocating Compressors
Vilter 8-Cylinder 100 hp, Size A11K448B, S/N 33968 with Starter
       
Vilter 8-Cylinder 100 hp, Size AK448, Model VMC-440, S/N R45240 with Allis Chalmers Starter
             
Vilter 6-Cylinder 60 hp, Size 446, S/N 3268ARC with Motortronics Starter
             
Vilter 6-Cylinder 60 hp, Size AK446, S/N H16950 with Starter
         
Vilter 4-Cylinder 50 hp, Size A12K444, Model VMC440, S/N 33832 with Starter
           
(2) Additional Vilter 6-Cylinder Ammonia Compressor Heads, Size AK446, Model VMC440, S/N R4874 and S/N 33618, Also Including (2) Spare Compressor Motors Including Baldor 100 hp Compressor Motor, 1775 RPM & Emerson 60 hp Rebuilt Compressor Motor, 1480 RPM, both 230/460 V, 3 Phase
               
Ammonia Auxiliary
1994 FES 103” H x 56” W Vertical Ammonia Receiver, S/N 940368 with Oil Separator and Pump
           
Ammonia Controls: (1) with Allen Bradley PLC Panelview 1000 & (1) by Uni-Temp with Q-Term-J10 Digital Read-Out; Manning Leak Detection Monitor System, Model GM-1 (2) Ammonia Oil Pumps
           
Evaporative Ammonia Condenser
Crepaco 260-Ton Evaporative Condenser, Model PMC-395, S/N 824283
                 
(8) Ammonia Cooler Evaporator / Blowers
(2) 2001 Krack Single 42” Fan Ammonia Blowers, Model SPCS-1L-32-4-3-DXA-HGC-IP, 230/3/60 V, Hot Gas Coil Defrost with Insulated Drain Pan, 16,190 BTU’s/TD
               
2001 Krack 2-Fan Ammonia Blower, Model PCS-2S-5110-4-1-1/2-DXA-HGC-IP, 230/3/60 V, Hot Gas Coil Defrost with Insulated Drain Pan, 21,505 BTU’s/TD
               
Krack 3-Fan Ammonia Blower, Model DTX3S-720-HGC-DXA, S/N 375142C
               
(2) Evapco 3-Fan Ammonia Blowers, Model NTX3-2664-033P, 230/3/60 V, Hot Gas Coil Defrost, 126,000 BTU t 15 TDD
               
(2) Evapco 4-Fan Ammonia Blowers, Model NTX4-2664-033P, 230/3/60 V, Hot Gas Coil Defrost, 126,000 BTUH t 15 TDD
               
(2) Ammonia Ice Builders
2004 Chester Jensen 70,000-Ton (30 ft. L x 130” W x 88” H) Ammonia Ice Builder, Model XM-18-10-65, S/N 1725 with Receiver, Pumps and Roots 3 hp Blower
               
31 ft. L x 9 ft.7” W x 100” H Ammonia Ice Builder with Receiver and Pumps
               
Ammonia Shell & Tube Glycol System
10 ft. 5” L x 36” W Shell and Tube Glycol System – Complete with Purity 500 Gal. Hinged Lid S/S Tank, (2) 10 hp Circulating Pumps (Note: Chilled By Ammonia)
         

Cleaver Brooks 150 hp Boiler, Model CB293-150, S/N L-19092 – Natural Gas and #2 Fuel Oil, 150 psi, 6,275,000 BTU/Hr
         

(2) 2001 Phoenix Air Systems LLC Air Handling Systems, Model PH-180B95A, S/N 0310-105602-0 and Model PH-120B95A, S/N 0310-105601-0 – Complete with Eclipse Air Heat Burner, Honeywell Controls, Allen Bradley Micrologix 1200 PLC Controller, 20,000 CFM, 230 V, 3 Phase (Heat and Positive Heat) (Dimensions Approximately 90” W x 92” H x 23 ft. L)
               

1999 Kaeser 75 hp Screw Air Compressor, Model C291, S/N 1007, 230 V, 3 Phase, 145 psi
           
1992 Kaeser 75 hp Screw Air Compressor, Model CS90, S/N 753190, 47,084 Load Hours, 78,874 Service Hours
       
Air Compressor Auxiliary Equipment
2003 Kaeser Refrigerated Air Dryer, Model TE91, S/N 1015 with Filter System
           
(2) 7 ft. H x 36” W Vertical Air Receivers
             
14 ft. L x 54” W Horizontal Air Receiver with Filter System
             

29” W x 114” L x 20” Deep S/S Wash Trough with Late Model Ampco 10 hp Pump; 6 ft. L S/S Sanitary Wash Sink; Assorted Portable Stairs, S/S Carts and Tables, S/S Baskets, Various Small S/S Wash Sinks, Pallet Containments, (69) Bonar 39” W x 40” W x 40” H 200 Gal. Resin Totes, Fiberglass Ladders, Emergency Eyewash/Shower Stations, Strahman M5000 Wash Stations, Dollies, Foaming Stations, Kent Floor Scrubber, Platform Scale, Pedestal Fns, Air Curtains, Half a Dozen Fairbanks and Other Digital Scales; Alk Ta High Pressure Washer; COP Tank with Tri-Clover 3 hp Centrifugal Pump & More
             

Miller Thunderbolt XL Welder; Banding Cart; Craftsman 15-1/2” Drill Press; Ridgid 400A Threader with Stand; Parts Shelving; Metal Tables with Vises;  Note: Additional Maintenance Shop Items to be Added
             
Spare Parts Including: (3) SM Cyclo Case Conveyor Drives; Tri-Clover 2” Flow Diversion Valve Some New and Used Max 3498 Case Conveyor Chain, Case Conveyor Wear Strips, Large Assortment Black Pipe, Condulet and Other Stock, Plumbing Fittings, Assorted Hardware, Electrical Supplies including Condulet Fittings; Pipe Rack with Piping; Large Assortment of Spare Motors and Drives including Toshiba 75 hp Motor, 1185 RPM and New and Used Motors from Baldor and Others; Drive Parts Including Bearings, Sprockets, Couplers, V-Belts & More
         

Allen Bradley PLC 5/40 Programmable Controller – Complete with 12-Slot Rack with Panelview 1400e and 550 Displays; Anderson Chart Recorders; Variable Speed Controllers; Tank Level System & More
           

Assortment of Chemical Storage Tanks with Containment Including Johnson Diversey Chemical Feed Pumps
               

(8) Homogenizers

(2) Gaulin Homogenizers, Model MC45, (1) Type 5000 MC45 2TPS, S/N 2828878

Gaulin Homogenizer, Model 2250 MC18-2TPS,
S/N 9808389, 50hp

Gaulin Homogenizer, Model 125CDG,S/N 62542331

Girton R & D Homogenizer, Model 15MR-8TBA,
S/N 68810795

Tetra Pak Homogenizer, Type ALH25, S/N
500321, 1,900 GPH, 1994

(2) Cherry-Burrell Homogenizers, Model SS750,
S/Ns 79024& 261330, 5,000 GPH, 2 Stage

(5) Additional Separators

(3) Westfalia MSA 120 Separators, (1) Type MSA120-47-076, S/N 1657977
(Note: (1) Lebanon, Pa – Please Call to Schedule an Inspection)

(2) Westfalia Separators, (1) Model SAMM 12006,
S/N 1648776 & (1) 20006 – Bowl S/N 1638306 – Missing ID Plate - (Note: Both Not Complete)

Additional Fillers

Jug Filler with Descramblers

Franz 20-Valve Gal. & Half Gal. Jug Filler, Model
20GR, S/N 20-05-0499

New England Machinery Inc. Descrambler, Model NEHA-48, S/N 2387, Complete with 92” H Elevated S/S Bin Hopper, Model H/E – 20, S/N 1-8555 with 18” W Conveyor, 52” W x 52” W x 36” Hopper

Omega Design Corp. Model 0S5-72
Descrambler

Elevated S/S Bin Hopper

Carton Fillers & Casers

Evergreen QPC-12 Carton Filler

Evergreen H5 Carton Filler w/Portola Fitment

Cannon S/S Pneumatic Drop Caser Model 120 – 1096566, S/N 120-1498, Complete with (2) Lane Feed with PLC Controls

Cultured Products & Other Fillers

Zitropak 2-Head Cultured Products Straight
Line Filler, Model ZR-2000 w/Tamper Evident
Sealer, 3 Sizes Change Parts

Zitropak Cultured Products Filler, Model Z1000,
S/N IL-Z2034, Operated on 3-5lbs.

(2) Osgood Rotary Cup Fillers, S/Ns 29575
& 29214, 8/16/24 Ounces

Osgood Cup Filler, Model 2001-16, S/N 29238
Osgood Model 4600 Cup Filler (1-1/2 lbs.)

Osgood 8 &16oz. 4 Lane Cup Filler, Model 4625

Additional Tanks

(2) Aseptic Tanks

Cherry Burrell 3,000 Gal. S/S Aseptic Tank

APV 8,000 Gal. S/S Aseptic Tank, S/N 2495

Additional Processors

Over (10) Additional Processors from 300 to 500 Gallon

More Additional Tanks

Todd Street Inc. 170 Gal. S/S Single Shell Tank, S/N 2788-00

Several Small S/S Tanks to Choose from Including 43” H x 38” W, (2) 48” H x 34” H

Additional CIP System

3-Compartment Skid Mounted S/S CIP System, (98” L x 36” W x 30” H), Complete with (2) S/S Shell & Tube Heat Exchangers, (Uninstalled & Ready to Load!!)

Additional Plate Presses

(2) APV Cream Presses, Model SR25SL,
7,083 lbs per hour, Model SR24S

(3) APV 26”H Chill Presses, Model SR15S,
S/N 32037 – (30) Plates; S/N 23404-1– (40) Plates
& S/N 23404-2 – (41) Plates

APV R51 S/S HTST Press, Complete with 3-Dividers, (Aprox. 200 AGC Late Model Plates), (Formerly Operated at 5,000 GPH)

(4) Additional APV& Alfa Laval Plate Presses,
Including Models R51, 5,000 GPH with AGC
Plates, SR250, CR51, CR30 & R5

Cheese Equipment

(5) Stoelting Cheese Vats, 72” W x 27.5” L x 32” – 37.5” D, (Located in Louisville KY – Please Call to Schedule an Inspection)

Kusel Product Transfer System

Ice Cream Equipment

(6) Freezers

Cherry-Burrell S/S Clad Ice Cream Freezer, Model VS 200, (Note: ID Plate Missing), (Note: Missing Dasher Assembly)

Crepaco 3-Barrel Ice Cream Freezer, Model D4081W304G, (300GPH)

Waukesha Cherry-Burrell 3- Barrel Ice Cream Freezer, Model 3D90, S/N 5308, Complete with Upgraded Pumps & Controls, (900GPH)

Waukesha Cherry-Burrell 3-Barrel Freezer, Model VP 4.5-3, S/N 5889

Crepaco 3-Barrel Freezer, Model 304, S/N C-6957, 79”W x108”L x 76”H

Sani-Serv Soft Serve Freezer, Model B10, S/N 107805

(4) Fruit Feeders

Waukesha Cherry-Burrell Fruit Feeder, Model HCIF, S/N 2754

APV Fruit Feeder, Model G-3000-S-420, Complete with Allen Bradley Flex 4 VFD, (Note: Missing Auger Tube)

Crepaco Fruit Feeder, Model FF, S/N 2149

Hoyer Fruit Feeder, Model FF 4000, S/N 201-3211, (Note: Missing Some Parts)

(3) Flavor Tanks

3-Compartment@100 Gal. Insulated Flavor Tank, (27” W x 38” W x 24” H), (Note: Missing Agitators)

Cherry Burrell 2-Compartment @ 250 Gal.

G.H. Hicks & Sons 3-Compartment @ 300 Gal.
Flavor Tank, S/N SS-1054

Additional Ice Cream Equipment

Interbake Foods Inc Ice Cream Boxer,
Model ICS 6-12, S/N A633

Stormax Stick Inserter for 8-Wide Vitaline, with Allen Bradley PLC Controller

S/S Elevated Lidder, (89” H x 36” W), Model OUF3100, S/N RU-602, with Seco VFD

Anderson Novelty Boxer, Model 592-2, S/N 32964

Ice Cream Fillers

Waukesha Cherry-Burrell Half Gallon Square Filler, Model Technohoy-588C, S/N 03/95, Complete with Allen Bradley SLC 5/01 PLC Controller, Emerson FX-490 Server Drive with Gluer

Huhtamaki 56 oz. Squaround Rotary S/S Ice Cream Filler, (8-Station), with Omron PLC Controller & Electro Cam 5000

Hardening Equipment

New, Never Installed Scanima Spiral Tunnel (Supplied by Tetra Pak Hoyer), Designed for
2,000 GPH Ice Cream in Squaround Half Gal. Packages or 16,000 PPH. 44” Belt Width
(41”Effective Width), 1,256 Ft. Belt Length, 3,724 Ft.2 Belt Area, 3.25 - 22 FT/Min.Variable
Belt Speed, 17 Tiers, 7” Max Product Height, Purchased for over $700,000. - (Located in Dallas TX – Please Call to Schedule an Inspection)

Glacier Hardening System, Model 600-E, Includes Ammonia Evaporator w/Related Refrigeration, Conveyors, Ran@-60 Deg. F, (Salt Lake City - Utah – Please Call to Schedule an Inspection)

Votator S/CR Mixers

(2)Waukesha Cherry Burrell Votator/CR Mixers, Model 929050, S/N 98025MA, Complete w/30HP
Motors, Shell MAWP– 275 psi@300 Deg. F, Mounted on S/S Frames, Still in Shipping Crate

Blenders
APV Crepaco 200 Gal. Blender/Liquifier, S/N C9466

Additional 250 Gal. Blender

Tri-Blender (Note: Not Complete)

Additional Packaging

(3) Palletizers

(2) Cannon Palletizers for (4) 1-Gal. Plastic Cases

Von Gal Palletizer, Model LopalM1211, S/N 33688

Case Erectors, Box Formers & Case Packers

Wepackit Box Erector & Sealer w/Nordson
Hot Melt Unit

Pearson Box Erector, Model R-235

(2) Moen Box Forming Machines,
Model PF106-B1FQ

(2) Moen Case Sealers, Model CS204

(2) 2005 Jr. Automation Technologies, Inc. Case
Packer

Sabel Manufacturing Box Former,
Model SE, S/N 689

Integrated Packaging Machinery 5lb. Boxer
w/Panelview 550

Wrappers & Tunnels

Great Lakes Half Gallon Wrapper Model 708E-21, S/N B0286

Great Lakes Bundler Model 708E-27, S/N B0286, Right Angle

Arpac S/S Wrapper / Tunnel, Model 108-24SS, S/N 1280, with 24” W x 15” H Opening, (Note: Missing Some Controls)

(2) Great Lakes Shrink Tunnels, Model 708TC, S/N T0778 with 28” W x 13” & 16” H Opening

S/S Overwrapper with Allen Bradley PLC

Formost / Fugi S/S Overwrapper, (Missing ID Plate)

Pallet Stretch Wrapper & Pallet Strapper

Orion Pallet Wrapper, Model H559, S/N 4044253

Signode Strapper, Model MCD 500, for 40”x 40”Pallets

Other Additional Packaging

Bander w/CMS Outer Seal

Bemis Top Taper, 2 –5lb.

Bemistrapper Strapper

Cannon Accumulation Table

Labelers & Coders

(4)Videojet Inkjet Coders,
Models Excel 100, 170 &178

B&H Labeler, Model BH 2000 RCO, S/N 2123 0997 1014L, Set Up to do 16 oz –Like New-

Weber Labeler

Metal Detectors

Safeline 3” In-Line Metal Detector

Cintex S/S Metal Detector Model CS2048, S/N 46379, (14”W x 8” H Opening), Mounted on 52” L Portable Power Conveyor System

Additional S/S Pumps

Other Additional Positive Displacement, Centrifugal, Diaphragm, and Sine Pumps

Hydraulic Systems

Hydraulic Unit, 120 Gal., 45GPM Pump Output, 20HP, 1 Pump

Hydraulic Unit, 30 Gal., 15HP, 1 Pump

Hydraulic Unit, 60 Gal., 15GPM Pump Output, 20HP, 2 Pumps

Thermal Transfer Products Hydraulic System w/ Cooler and (2) Bosch Hydraulic Pumps, S/Ns 685 & 881
Conveyor Specialties Hydraulic System, S/N 462, 63 & 64, Complete with (3) 20 hp Pumps and Reservoir

HSS Hydraulic System with 15 hp Pump & Reservoir

GHI Hydraulic System with 7.5 hp Pump & Reservoir

US Petrolon Portable Oil Filtration System

Additional Ammonia Compressors & Related

Vilter 100 hp Screw Ammonia Compressor,
Model VS6751A

(2) Frick Ammonia Screw Compressors,
Model RWB40

(2) Additional Vilter Reciprocating Compressors

GEA Ammonia Control Panel with Touch Pad Display

Ammonia Small Plate Chill System

Additional Air Compressors

Sullair Screw Air Compressor Model 10B-40, S/N 003-57484, 40HP, 125PSI

Sullair Screw Air Compressor Model 10-25-H, S/N 19744FGE, 25HP, 125PSI, 1,765RPM, Mounted on Horizontal Tank

Twistair Air Compressor Model TA030B2-5, 30HP, 125PSI

CompAir Air Compressor, Model L132-9W, S/N 349020/0686, 150hp, ~784CFM, ~130PSIG
- Low Hours!

(3) Quincy 125 hp to 25 hp Screw Air Compressors & Other Additional Air Compressors

Zeks Refrigerated Air Dryer

Pure-Aire Air Dryer, Model PCF100, S/N 4670

Dust Collector

DCE Unimaster Dust Collector, (30”W x 30” W x 8 ft H)

Other Additional Equipment

Rite Hite 83” W x 5 ft L Dock Leveler with Pump & Hardware, -Like New-

B&G Shell & Tube Heat Exchanger Skid with Pump

Jet Spray S/S Wash Trough, (75” L x 20” W x 17” D) with Pump

2005 Bishamon 4,500 lb – 43” W Wide Pallet Lift Platform – Like New-