(2) 4’ x 4’ x 6’ H S/S Hydraulic Dump Stations
   
(2) 15’ L Inclined S/S Auger Conveyor Systems with 16” Augers, 5’ x 5’ Bin, Hydraulic Drive, Mounted on Load Cells
 
Wolfking S/S Mixer/Grinder Model SFG 1500/250, S/N 53568, 4’ W x 5’ W x 52” Deep with Controls

Wolfking S/S Mixer / Grinder Type TSMG-1250/25U-UNI, S/N 57319, 63” W x 44” W x 39” D, Dual 30” Paddles, with Bone Limiter Attachment & MTC 126” H Tote Lift Station

Hydrauflaker Type HF-110R, (21” W x 9 ½” H)

(2) MTC 14’ & 11’ L Portable S/S Inclined Auger Conveyor Systems, (1) Model MTCS-12-7, both with 12” S/S Screw Augers

(2) Hydraulic S/S Dump Stations – 52” W x 50” W x 29” H
   
(2) 73” L x 57” W x 29” H S/S Hydraulic Trough Dumpers Mounted on Load Cells
 
25’ L Inclined S/S Conveyor System with 24” W Plastic Mesh Style Belt, (Divider Type), with Drive & S/S Walk Platform
 
Wolfking S/S Block Grinder Model C400, 52” W x 43” W x 32” D, Complete with 13” Screw, 125 hp Motor with Controls & 400 mm Grinding Plate

FPE 14’ L Inclined S/S Auger Conveyor System Model SC126, S/N 0413, Complete with 48” W x 42” W Hopper & 24” S/S Screw
 
Wolfking S/S Mixer / Grinder, 62” W x 59” W x 39” Deep, Complete with 30” Dual Paddle, Bone Limiter Attachment, Tote Dumper & Walk Platform
   
Additional Line #2 Items
Rietz S/S Mixer / Blender / Grinder Model RS23-K5406, S/N RS800137, 6’ L x 46” W x 32” D, with Dual 24” S/S Augers & Hydraulic Dump Station

Globus 94” L x 52” W S/S Tumbler, Model Inject Star 2600, S/N 2600-154, with 4’ H Hydraulic S/S Lift Station

Custom Continuous Forming Press / Extruder Complete with 4 ¾” Opening, with 25” w x 24” W x 29” D S/S Hopper

(3) Ross S/S Dual Feed Slicers, Model 950-2, with Hydraulic Drives

BOC Gases 15 ft. L S/S Nitrogen Freeze Tunnel, Model KFT 36 10 CU, S/N 30 008 02, Complete with 37” W Belt & In-Feed & Out-Feed Conveyors

Rebuilt in 2004 Stein Self Stacking / Gyro Compact Spiral Oven, Model GCO42, S/N 114, Drawing # 271-3-1018/114, Complete with 69” H x 7’W Main Spiral Section, Sprayballs, Circ. Fan, 14’L x 138” H x 105”W Modular S/S Constructed Building, Sprayballs, In-Feed & Out-Feed Conveyors with Drain Tank, Filters, Tri Clover 30 hp Pump with Controls

Recently Rebuilt Cook King Pro Pak Continuous S/S Constructed Cooking Oven, (Convection Oven), Approx. 55’ L, Complete with 34” W S/S Mesh Type Belt, Fully Enclosed Lift Type Lids with 1 Ton Hoists, Charmarker Attachment, Natural Gas with Burner & Controls
   
Cook King Pro Pak Continuous S/S Constructed Cooking Oven, (Convection Oven), Approx. 68’ L, Complete with 34” W S/S Mesh Type Belt, Upper/Lower Impingement Feature, Fully Enclosed Lift Type Lids with 1 Ton Hoists, Charmarker Attachment, Natural Gas with Burner & Controls
   
Recently Rebuilt Cook King Pro Pak Continuous S/S Constructed Cooking Oven, (Convection Oven), Model CB-3430, Approx. 50’ L, Complete with 34” W S/S Mesh Type Belt, Fully Enclosed Lift Type Lids with 1 Ton Hoists, Charmarker Attachment, Natural Gas with Burner & Controls
   
(2) Stein Continuous S/S Constructed Cooking Oven, 15’ L, Model VFO-40-30, S/N 112 & 113, Complete with 41” W S/S Mesh Type Belt, Fully Enclosed with On-Board Automatic Lift System, Exhaust Fans, Charmarker Attachment, Steam and/or Natural Gas Burner & Controls
 
21 ft. L x 13 ft. W x 7 ft. H Modular Steam Oven, All S/S Interior Constructed, with Controls, (Exterior Installed)

(3) Wolfking S/S Mixer / Grinder Model TSMG1500/250, 62” W x 58” W x 36” D Complete with Dual Paddle, Controls with Dump Stations

(4) Formax Patty Former Model 26, S/N FBL 641 & FBL118, (2) with Tenderform Option, Complete with Touch Controls Tote Lifting Stations & Assorted Forming Plates   Note: Recently Completely Rebuilt by Tomahawk with a Cost of $200k Each

Handtmann Stuffer, Type VF200, S/N 14554

(2) Polyclips Mounted on S/S Tables

Hobart S/S Vertical Meat Saw, Model 6801, S/N 27-1167-702
   
Small Hobart Vertical Meat Saw

Hydrauflaker Type HF-110 LH, 82” L x 24” W

Ross S/S Slicer Model 950-2, with 24” Blade Dual Feed
   
Additional Ross S/S Slicer

Ross Clam Shell / Unifrom Meat Press, Model 914, S/N 1230 with Die Set

32” W x 57” L S/S Injector with (69) Tubes

S/S Meat Loaf Stuffer with 39” L x 25” W x 30” D S/S Feed Hopper & 6” Screw, Amfec 9’ H Tote Dump Station & Portable Ketchup Applicator with 29” W x 24” H S/S Tank & Conveyor System

(2) Cardox Nitrogen Ultra Cryogenic Freeze Tunnel, (30 ft. L x 32” W), Compete with 3-Pass, Hydraulic Drives & S/S In-feed & Out-feed Conveyors

(2) EIA S/S Metal Detectors, Models TH/3F, S/N 20200251012 & 11 – 18” W x 13” H & 7 ¾” W x 9 ½” H, Mounted on S/S Conveyors
   
(2) Safeline S/S Metal Detectors, 18” W x 13” H & 7 ¾” W x 9 ½” H, Mounted on S/S Conveyors
   
Goring Kerr S/S Metal Detector, Type DSP2 – 14” W x 11” H, Mounted on S/S Conveyor

(5) Interpack Tape Sealers Models USA 2024 – SB, CP-322U & Others
   
Central Tape Sealer Model 122U, S/N 001 007
 
(3) Additional Tape Sealers

(2) J.C. Pardo & Sons Approx. 500 Gal. Jacketed S/S Kettles, BD #2535 & 2246, S/N 5976-2 & 4772, 100 psi @ 338 Degrees F, (Inside Dia. 54” W x 42” D), with Hydraulic Agitators & Safety Guards

Crepaco Approx. 8,000 Gal. Horizontal S/S Tank, S/N 4171, with Dual Front & Rear Horizontal Agitators, Valves & Tri Clover Pump, (195” L x 115” W)

Stein / Frigoscandia Auto Batter Control System, Model ABC-II-HF, S/N 648, with 29” H x 24” W S/S Tank & Controls
 
38” W x 36” D S/S Tank with Hydraulic Agitator & Pump
 
Mueller 5’L x 42” W x 44” H S/S Tank with Tri Clover 7.5 hp Pump
 
(9) Assorted S/S Tanks Up To 100 Gal.

Auger Type
16 ft. L Inclined S/S Auger Conveyor with 70” x 60” Hopper & 18” S/S Auger
   
12 ft. L Inclined S/S Auger Conveyor with 51” x 34” Hopper & 12” S/S Auger with Dump Station
 
Product Conveyors
Very Large Selection of Product Conveyors Throughout Facility with Various Sized and Type Belts Most Hydraulic Driven– Too Much to List!
 
Approx. 100 ft. Overhead S/S Product Conveyor System with 15” W Belt Drives
 
110” L x 30” W Conveyor Drain Table
 
18 ft. L S/S Conveyor System Multiple Section with 30” S/S Belt

(4) 28” W All S/S Flatteners
   
Holox Dicer Model HA121, S/N 220080
   
(6) 28” W & 41” & 19” W Perforators All S/S Mounted on S/S Conveyors with Hydraulic Drive
 
78” L x 28” W S/S Conveyor Flattener with Perforator & Hydraulic Drive
 
78” L x 10” W S/S Conveyor Flattener with Dual Drums

(2) All S/S Hydraulic Dump Stations 56” W x 36” D
 
Hydraulic Dump Station 52” x 55”
 
Other Additional Dump Stations!!

2005 Frigoscandia / Stein Self Stacking Spiral Freezer, Drawing # Gyro Compact, Spiral Size 6’ H x 14’W, Complete with 2” Spacing, 28” W Belting, (4) Evapco 27.75 Ton Evaporator 2- Fan Blowers, Model TFCA2-4310VF-10M, S/N 5-126580, In-Feed & Out-Feed Conveyors, 22’L x 16’W x 21’H Modular Building with Controls
   
Frigoscandia / Stein 21’ L Shake Down Freezer, Complete with all S/S Constructed, 36” W Belt, Walk Platform, Ammonia Evaporator, 24’ L x 8’ W x 12’ H Modular Building, In-Feed & Out-Feed Conveyors & Controls
   
Tandem Spiral Freezer Approx. 11’ H x 10’ W Frames, 4” Spacing, Welded Constructed, Drives, Chain, Controls with Fridgid Coil 2-Fan Ammonia Blowers, (Note: Belting Uninstalled)
   
Tandem Spiral Freezer Approx. 20’ H x 12’ W Frames, 7 1/2” Spacing, Welded Constructed, Drives, Chain, Controls with Evapco & Vilter 2 & 3 Fan Ammonia Blowers, (Note: Belting Uninstalled)

(7) Screw Compressors
FES 600 hp Screw Ammonia Compressor, Model 28ME, S/N AB10053 JPN, with Micro II E Display, (Unit-BC#2)
 
Sullair 500 hp Screw Ammonia Compressor, Model B32LB717-3-400HP, S/N 056-01399
 
Vilter 400 hp Screw Ammonia Compressor, Model VRS-2700, Order #H71446, Skid Mounted with Ammonia Receiver with Ram Starter, (Unit-BC#5)
 
Vilter 400 hp Screw Ammonia Compressor, S/N 3836-33-2, BN – 41240, with Microprocessor Controller & Updated Motor, (Unit -HSC#3)
 
Mycom 350 hp Screw Ammonia Compressor (Rebuilt in 2006), Model 250 VDD, S/N 2516144, with GEA/FES Micro II Display, (Unit-HS#2)
 
1999 Vilter 250 hp Screw Ammonia Compressor, Model A27600M, with Uninstalled Rebuilt Screw & Microprocessor Controls, (Unit HSC#6)
 
2000 Vilter 100 hp Screw Ammonia Compressor, Model A27618B & V2A090N00RIVSSCN (On Head), BN # 400035, with Vission Micro Controller, (Unit-SWC#1)
 
Reciprocating
(2) Crepaco 10 Cylinder Ammonia Compressors, (1) with 75 hp Motor, Model KF10 & 4, S/N 50768 & 51178
 
Additional Crepaco 4 Cylinder Compressor Head Units in Storage
 
(6) Evaporative Condensers
Evapco Model PMCB-480, S/N 996261M-3M, (#3)
 
BAC Model VXMC 560, S/N 2B136, (#7)
 
Evapco Model PMC-620N, S/N 867808, (#5)
 
Crepaco Model CPM-600, S/N 813185, (#4)
 
(2) Imeco Models AJ6347P, S/N 86921 & 2
 
Refrigeration Support
2001 RVS Regenerator BD# 14378; Hansen Auto Purger Model AP16, S/N 114769; Suction Trap; (2) Intercoolers; (3) Recirculation Systems; Installed Ammonia Gate Vales; (4) Cornell 3hp Ammonia Pumps; (2) EL Nickel & Other 17 ft. L x 48” W & 13 ft. L x 40” W Horizontal Receivers; Oil Scrubber
 
Blowers
New 2005 Krack 4-Fan S/S Clad Ammonia Blower, Model BTRS-418-DXA-1A-10, and S/N 531844-010-002, (Still in Shipping Crate!)
   
(12) Vilter & Krack 3 & 5 -Fan Low Profile Ammonia Blowers
 
(4) 2-Fan Ammonia Freezer Blowers
 
(5) 4-Fan Ammonia Blowers
 
(8) Kramer 4-Fan Freon Freezer Blowers with Roof Mounted Package Compressor Units

2002 Cleaver Brooks 700 hp Boiler, Model CB1700 800 150, B/N 1513, S/N OL101819, 150 SP PSI, Input 32,659,000, Natural Gas
 
Kewanee 350 hp Boiler, S/N SN9723
 
Feed System with Grundfos Pumps with 50 gal S/S Tank with Agitator
 
US Filters Water Softener System with (2) 5 ft H x 36” W Filters & Salt Tank

(3) Hydraulic Systems with 20 hp Pumps & Reservoirs
 
(2) Vikers 60 & 50 hp Hydraulic Pumps

(8) Mettler Toledo & GSE Digital Platform Scales; Fiberglass Ladders; Eyewash Stations; S/S Sinks; Large Selection of S/S Tables; 10’W x 12’ W Portable Office Building; Wheel Barrels; Large Assortment of S/S Platforms; 40” Round Scissor Lift Platform; Portable Stairs; Large Assortment of Parts Room Shelving; Hydraulic Bailer; Dock Plate; Hydraulic Pallet Jacks; Garbage Cans; Power Pack & Other Rapid Power Doors; Late Model Freezer & Cooler Doors & More
 
S/S Carts & Racks
(32) 54” x 38” x 77” H- 8-Shelf; 43” x 46” x 64” H- 6-Shelf; 42” W x 32” W x 77” H – 8-Shelf; (5) 43” x 32” x 77”H- 70” H; (18) 70” x 30” x 58”H – 6-Shelf; (22) 31” x 44” x 73”H- 6-Shelf; (10) Pallets of Plastic Storage Racks
   
Portable Totes
(13) 39” x 47” x 36” H S/S Portable Totes; (27) Koch & Others 24” W x 19” D Portable S/S Totes

36 ft. L x 90” W x 8 ft. H Single Axle Steel Constructed Tanker (For Inedible Products)

Teco VFD’s; (2) Submersible Pumps; 25 hp Air Compressor with Horizontal Tank; Alternate Energy Systems Unit Model WB-350/HVS-30MM, S/N WB-448; (2) Dock Mounted Thermo King Units; Neptune Meters; Chemtrol Automated Water Treatment Unit; (5) Miller Food Service Warming Tables; (2) Electric Pallet Jacks with Various Chargers; Large Assortment of Motors & Drives – Some Motors New up to 400hp & More

Clausing 56” Lathe Model 691, S/N 603480 with 3-Jaw Chuck; Index Vertical Milling Machine Model 845, S/N 12907 with Rotating Head & Kurt Vise; Belt Sander; Metal Brake; Steel Stock with Rack; Double End Grinder; Steel Work Bench; (4) Miller & Hobart Welders; Ridgid 300 Pipe Threader

Bettcher Dyna Press, Factory # 105732, S/N 7576A20, (Bacon Press)
 
28” & 26” W Perforators
 
Ross Meat Tenderizer, Model TC700M, S/N 4164FAM
 
Almann AL AL, Model 141-21, S/N 141/215
 
Vemag Stuffer, Model Robot 1000 S3
 
AEW Automatic Slicer, Model APC, S/N 60970072
 
Dorit 12” W Meat Injector Type Inject-Jet, Type PSM10, S/N 12370-263
 
14” W S/S Injector
 
Blentech Blancher, 20’ L Jacketed S/S Auger Conveyor, Model CS-1820-W, S/N 8502, with 18” S/S Screw  
 
Custom 5’ L x 34” W x 35” D Mixer / Grinder, (Note: Missing Drive Motor)
 
Dohm & Nelke Extruder No. 257, S/N 370, (For Processing of Skinless Sausage Links)
 
S/S Metal Detector 14” W x 10” H
 
2002 Baader / Johnson Soft Separator, Type 607-505, S/N 120929, with 14” S/S Auger
 
(2) Formax Patty Formers, Model 26 & 193
 
15’ L S/S Constructed Freeze Tunnel with 18” W Belt
 
Scanvaegt Int. A/S / Marel 30- Station Rotary Scale Filler, Type 7260.30.15, S/N 98444401 with Buckets
 
Additional Machine by Scanvaegt Including (2) Type Combibatcher Model 7200
 
Heat & Control Mulit Purpose Oven, 57’ L S/S Continuous Oven Complete with 40” W x 5” H Opening, Lift Type Lids, 2,500,000 BTU hr with Burner
 
Additional Cook King Pro Pak Continuous Oven Components, (Possibly a Complete Unit)
 
Seydelmann Mixer / Grinder, Type CS160, S/N 81299

Anco Slicer
 
UBE / Hartman Slicer Model 90-75, S/N 1800-209
 
Butcher Boy Vertical Meat Saw
 
Weldotron Wrapper Model 1662
 
OMC 2002 Parts Machine
 
(2) All Pac Wrappers, Model Super 7, S/N 93088
 
(2) Urschel Dicers
 
Teco / Townsend Skinner Model 7500, S/N 1370
 
Radar Line S/S Oven, Model QMP, S/N 879B, S/N 0040
 
Poultry Equipment:
Simon / Johnson 21-Station 8-Pcs. Poultry Processing Line
   
Food Applications Systems 1000 Baggers
 
(7) Dapec / Systemate 10 – Station Poultry Processing Machines, Models RTD & SRTD, S/N 039019, 20 & More
   
Large Selection of Various Other Machines Not Listed Please Check Back For Details