 |
1 |
1 |
Tri-Clover 3-Way 2" Long Stem Clamp Type S/S Air Valve, Model 761, S/N 158501-001 |
 |
2 |
1 |
Tri-Clover 3-Way 1-1/2" Long Stem Clamp Type S/S Air Valve, Model 761, S/N 526743-01 |
 |
3 |
1 |
Tri-Clover 2-Way 1-1/2" S/S Clamp Type S/S Air Valve, Model 761 |
 |
4 |
1 |
Tri-Clover 2" S/S Flow Diversion Valve, Model 262 - 227M-2 - 316, S/N 151843-01 |
 |
5 |
1 |
Online Instrumentation 2-Way 1-1/2" Clamp Type S/S Air Valve |
 |
6 |
1 |
G & H 3-Way 2-1/2" Long Stem Clamp Type S/S Air Valve |
 |
7 |
1 |
Waukesha / Cherry Burrell 2-Way 2" Clamp Type S/S Air Valve, Model WVALVE-00313 |
 |
8 |
1 |
Tri-Clover 3" Clamp Type S/S Tank Air Valve |
 |
9 |
1 |
32" L x 4" W Online 2" Clamp Type S/S Filter |
 |
10 |
1 |
Tri-Clover 2-Way 2" Clamp Type S/S Air Valve |
 |
11 |
1 |
Alfa Laval 2-Way 1-1/2" Clamp Type S/S Air Valve, Model 771-S - 10M-15 - 1-1/2-316L |
 |
12 |
1 |
Tri-Clover 2-Way 2" Clamp Type S/S Air Valve |
 |
13 |
1 |
Tri-Clover 2-Way 2-1/2" Clamp Type S/S Air Valve, Model 371 |
 |
14 |
1 |
Tri-Clover 2-Way 1-1/2" Clamp Type S/A Air Valve, Model 371 |
 |
15 |
1 |
Tri-Clover 2-Way 1-1/2" Clamp Type S/S Air Valve, Model 371, S/N 201707 |
 |
16 |
1 |
Tri-Clover 2-Way 1-1/2" Clamp Type S/S Air Valve, Model 371, S/N 201706 |
 |
20 |
1 |
Waukesha / Cherry Burrell 3-Way 3" Long Stem Clamp Type S/S Air Valve |
 |
21 |
1 |
Waukesha / Cherry Burrell 3-Way 3" Long Stem Clamp Type S/S Air Valve |
 |
22 |
1 |
2" Clamp Type S/S Check Valve |
 |
23 |
1 |
2" Clamp Type S/S Check Valve |
 |
24 |
1 |
2" Clamp Type S/S Check Valve |
 |
25 |
1 |
2" Clamp Type S/S Check Valve |
 |
26 |
1 |
2-1/2" Clamp Type S/S Check Valve |
 |
27 |
1 |
3" Clamp Type S/S Check Valve |
 |
28 |
1 |
3" Clamp Type S/S Check Valve |
 |
29 |
1 |
3" Clamp Type S/S Check Valve |
 |
32 |
2 |
Buhl 10 Gal. S/S Milk Cans (Note: No Lids) |
 |
33 |
2 |
Tri-Clover 3-Way 2" Clamp Type S/S Plug Valves |
 |
34 |
3 |
Tri-Clover and Other 3-Way 2" Clamp Type S/S Plug Valves |
 |
35 |
2 |
Tri-Clover 2" Clamp Type S/S Ball Valves |
 |
36 |
1 |
(3) Pc. Assorted 1-1/2" and 2" S/S Valves including: Check Valve, Butterfly Valve and Ball Valve |
 |
37 |
29 |
1-1/2" S/S Clamps |
 |
38 |
48 |
2" S/S Clamps |
 |
39 |
50 |
2" S/S Clamps |
 |
40 |
37 |
2-1/2" to 5" S/S Clamps |
 |
41 |
5 |
1-1/2" and 2" S/S Purgers |
 |
42 |
88 |
Assorted 1-1/2" to 3" Elbows, T's and Reducers |
 |
43 |
1 |
Telemecanique Altivar 31 Adjustable Speed Drive Controller, 7.5 hp, Type ATV31HU 55M3X |
 |
44 |
1 |
KB Variable Speed Controller, Model KBPC - 240D, 1/25 hp and 2 hp at 230 VAC |
 |
45 |
1 |
(5) Pc. - (4) New Square D Size 1 and Size 0 Starters, Cat #8536SCG3V03, #8536SB02V02S, 8536SCG3 and 50580D- BIF, 200/230 V with Allen Bradley 50 Amp Contactor, Cat #500L - COD94 |
 |
45A |
1 |
Partlow MRC 7000 Chart Recorder |
 |
46 |
1 |
Emergency Eyewash/Shower Station with Foamer |
 |
50 |
1 |
Fairbanks S/S Digital Scale, Model H90 - 5200, S/N H3616 58RF with 8-1/2" Platform |
 |
51 |
1 |
New Roll 8" W Air Curtain |
 |
52 |
2 |
12" x 12" S/S Sewer Drains with 5-1/2" W Drain Connector with Covers |
 |
53 |
25 |
2" to 4" S/S Weld Type Fittings including: Elbows, T's and Reducers |
 |
54 |
1 |
New Miller MiniLite Fall Limiter with Self-Retracting Lanyard with (3) 6 ft. Safety Straps |
 |
55 |
1 |
New Fostoria Dock Light, Model DKL-40VA-A |
 |
56 |
2 |
25" x 35" S/S Tables - (1) with Casters |
 |
57 |
1 |
6 ft. x 3 ft. S/S Table |
 |
58 |
1 |
15 ft. L x 36" W x 5 ft. H S/S Constructed Tanker Platform |
 |
59 |
1 |
S/S Tanker Sprayball - Complete with CM Electric Hoist with Trolley and Transfer Hose |
 |
60 |
2 |
Miller Safety Balancers with Trolleys and Safety Harnesses |
 |
61 |
2 |
Retractable Hose Reels with Strahman Nozzles |
 |
62 |
1 |
Pair 53" L x 18" W x 7-1/2" H Aluminum Ramps with (2) Chocks |
 |
63 |
1 |
Pair 53" L x 18" W x 7-1/2" H Aluminum Ramps with (2) Chocks |
 |
65 |
1 |
Waukesha Model 130 Positive Displacement Pump, S/N 19521897 - Complete with 3" S/S Head, 10 hp Motor with Sterling 4.5 Ratio Gear Drive Mounted on S/S Frames |
 |
66 |
1 |
Alfa Laval Small Plate Press, Type M3-BASE, Mfg. #30102 - 34750 with (30) Plates |
 |
67 |
1 |
APV 24" H S/S Plate Press, Model SR15S, S/N 32037 with (30) Plates and Butterfly Valve |
 |
68 |
1 |
Portable S/S Diaphragm Pump - Complete with 3" and 4" Clamp Type S/S Head (Asset #FDI 1086) |
 |
69 |
3 |
Crouch 20 ft. L 3" Transfer Hoses, Clamp Type and Threaded |
   |
71 |
1 |
Walker 40,000 Gal. Ammonia Refrigerated S/S Silo, S/N VSHT413R - Complete with Horizontal Agitator, Tri-Clover Air Valve, 288 sq.ft. Jacket, 150 psi including Level Sensor and Chart Recorder (Approximately 11 ft. W x 55 ft. H) (*Raw Silo #1A*) |
 |
72 |
1 |
Tri-Clover 5 hp Centrifugal Pump, Model C218 with 3" x 1-1/2" Clamp Type S/S Head and 1750 RPM Motor |
 |
73 |
1 |
3 hp Centrifugal Pump with 2" x 1-1/2" Clamp Type S/S Head and 3500 RPM Motor |
   |
75 |
1 |
2000 Walker 6,000 Gal. Horizontal Ammonia Refrigerated S/S Pasteurized Cream Tank, Model HHT, S/N SPG-21824 -- Complete with S/S Front, Air Valve, Dual Vertical Agitator, Dual Sprayball, 40 sq.ft. Jacket, 150 psi Working Pressure, 304 Stainless, Tank Level and Temperature Sensors and Chart Recorder (Approximately 112" W x 12 ft. L) (*CR #20*) |
 |
76 |
1 |
Waukesha Size 130 Positive Displacement Pump, S/N 8859SS - Complete with 3" Clamp Type S/S Head, 10/7.5 hp Motor with Dodge 5.1 Ratio Gear Drive |
 |
77 |
1 |
Tri-Clover 5 hp Centrifugal Pump, Model C218 with 2" x 1-1/2" Clamp Type S/S Head and Baldor 1750 RPM Motor |
 |
79 |
1 |
2-Tank CIP System - Complete with 46" W x 32" W x 40" H and 30" W x 31" W x 32" H S/S Tanks, Air Valve, LKH 10 hp Centrifugal Pump, Model LKH-20, S/S Control Panels, Chart Recorder with Piping (*Uninstalled on Skid*) (Asset #07287) |
 |
80 |
1 |
3-Compartment Skid-Mounted S/S CIP System - Complete with 98" L x 36" W x 30" H S/S Tank with (2) 52" L x 7" W S/S Shell and Tube Heat Exchangers (Asset #07265 and #07232) |
 |
81 |
1 |
Ampco 10 hp Centrifugal Pump with 2-1/2" x 2" Clamp Type S/S Head and 3450 RPM Motor |
 |
82 |
1 |
New Nord Gear Drive Motor, #90S/4CUS |
 |
83 |
1 |
(4) Pc. - New (3) 1/3 hp, 1.5 hp/3-1/4 hp Motors, 1725 RPM with Boston Gear Drive |
 |
84 |
2 |
New Baldor 3 hp Motors, 1725 RPM, 208-230/460 V, 3 Phase |
 |
85 |
3 |
New Baldor 10 hp, 7.5 hp and 3 hp Motors, 1760 RPM, 3500 RPM and 1165 RPM, 208-230/460 V, 3 Phase |
 |
86 |
1 |
New Baldor 15 hp Motor, 3500 RPM, 208 - 230/460 V, 3 Phase |
 |
87 |
1 |
New Sew Euro Gear Drive, Type R67AD30, 52.82 Ratio |
 |
88 |
1 |
New Dayton 1/4 hp Gear Motor, Type PSC, Cat #3XA87A, 115/230 V |
 |
89 |
1 |
New Roots Rotary Blower Head, Model 33-U-RAI, S/N 0608933892 |
 |
90 |
1 |
New Roots Rotary Blower Head, Model 33-U-RAI, S/N 0408981339 |
 |
91 |
1 |
New Teel 3 hp Circulating Pump, 3475 RPM, 208-230/460 V, 3 Phase |
 |
92 |
1 |
New Goulds 1-1/2 hp Circulating Pump, 3450 RPM, 190/380 - 415 V, 3 Phase |
 |
93 |
1 |
Tri-Clover 7.5 hp Centrifugal Pump, S/N S48019-0L, 3" x 2" Clamp Type S/S Head, 1765 RPM (Asset #07208) |
 |
94 |
1 |
Tri-Clover 5 hp Centrifugal Pump, Model C216 - Complete with Baldor 3450 RPM All S/S Clad Motor, 2" X 1-1/2" Clamp Type S/S Head |
 |
95 |
1 |
Tri-Clover 5 hp Centrifugal Pump, Model C216 - Complete with Baldor 3450 RPM All S/S Clad Motor, 2" X 1-1/2" Clamp Type S/S Head |
 |
96 |
1 |
Tri-Clover 5 hp Centrifugal Pump, Model C216 - Complete with Baldor 3450 RPM All S/S Clad Motor, 2" X 1-1/2" Clamp Type S/S Head |
 |
97 |
1 |
Tri-Clover 7.5 hp Centrifugal Pump, Model C216, 3500 RPM Motor with 2" x 1-1/2" Clamp Type S/S Head |
 |
98 |
1 |
Tri-Clover Approximately 2 hp Centrifugal Pump, Model C216 with 2" x 1-1/2" Clamp Type S/S Clad Motor |
 |
99 |
1 |
Tri-Clover Approximately 2 hp Centrifugal Pump, Model C216 with 2" x 1-1/2" Clamp Type S/S Head |
 |
100 |
1 |
Tri-Clover 3 hp Centrifugal Pump, Model C214, 3505 RPM Motor, 2" x 1-1/2" Clamp Type S/S Head (Asset #07217) |
 |
101 |
1 |
Tri-Clover 3 hp Centrifugal Pump, Model C214, 3505 RPM Motor, 2" x 1-1/2" Clamp Type S/S Head (Asset #07216) |
 |
102 |
1 |
Tri-Clover 3 hp Centrifugal Pump, Model C214, 3505 RPM Motor, 2" x 1-1/2" Clamp Type S/S Head (Asset #07218) |
 |
103 |
1 |
(7) Assorted S/S Racks |
 |
104 |
1 |
2" Installed S/S Piping including: (3) Tri-Clover 2" Clamp Type S/S Air Valves, Check Valve with Fittings and Hangers |
  |
105 |
1 |
200,000 lb. Truck Scale - Complete with 10 ft. W x 60 ft. L Pit-Mounted Platform, Mettler Toledo Digital Head, Model IND560, S/N 00179466BG with Epson Printer (Installed 2005) |
        |
110 |
1 |
Westfalia CIP Separator, Model MSA-160 - 01-076, S/N 1653966 - Complete with Balance Tank, Allen Bradley Controls with Panelview Display, Related Valves, Service Tools and (1) Pallet Spare Parts |
 |
111 |
1 |
Spare Westfalia Model MSA-160 Spare Clutch, Mfg. TSCHAN, Part No. 1.0458061 |
 |
112 |
1 |
Rebuilt Westfalia MSA-160 Motor, Mfg. by WEG, 50 hp, 1770 RPM, Frame No. 200L02/00AU 92710 |
 |
113 |
1 |
Westward 2-Ton Hydraulic Engine Crane (NOTE: Used to Service Separator) |
  |
114 |
1 |
2000 AGC Approximately 1,000 GPH Cream System with Press, Model PROHX-SH, S/N 00196 - Complete with (71) Plates, Balance Tank, Tri-Clover Air Valves and Fristam High Shear Pump, Model FKL25, S/N 003389 including Baldor VFD Located in Process Control Room |
      |
115 |
1 |
2006 APV 3,500 GPH HTST System with Press, Model R51T, S/N 20063003 000379 - Complete with (2) Dividers, (205) Plates, Tri-Clover 2" Flow Diversion Valve, 3" Nested Holding Tube, S/S Shell and Tube Heat Exchanger with Hot Water Set, S/S Balance Tank, Tri-Clover and Other Air Valves with Related Piping, Related Pumps, Designated Process Controls with Spare Plates and Gaskets (NOTE: Heat Exchanger Located in Ammonia Refrigeration Room) |
      |
116 |
1 |
APV 5,000 GPH HTST System with Press, Model R51, S/N 21567 - Complete with (2) Dividers, (294) Plates, Tri-Clover 2" Flow Diversion Valve, 3" Nested Holding Tube, S/S Shell and Tube Heat Exchanger with Hot Water Set, S/S Balance Tank, Tri-Clover Air Valves with Related Piping, Related Pumps, Designated Process Controls with Spare Plates and Gaskets (NOTE: Recently Replaced Plates and Gaskets) (ADDITIONAL NOTE: Heat Exchanger Located in Ammonia Refrigeration Room) |
 |
117 |
1 |
40 ft. L 3" 12-Loop Buttermilk Process S/S Holding Tube System (NOTE: Installed on 3rd Floor Warehouse) |
   |
118 |
1 |
Walker 25,000 Gal. Refrigerated Ammonia S/S Silo, S/N 2203 - Complete with Horizontal Agitator, Tri-Clover Air Valve (Approximately 36 ft. H x 11 ft. W) (Silo #2) |
   |
119 |
1 |
APV 25,000 Gal. Ammonia Refrigerated S/S Silo, S/N A8929 - Complete with Horizontal Agitator, Tri-Clover Air Valve, 150 psi Jacket (Approximately 35 ft. H x 11 ft. W) (PT5) |
   |
120 |
1 |
Mueller 6,000 Gal. S/S Glycol Refrigerated Tank, Model SHW, S/N D-32465-1 - Complete with S/S Front, Vertical Agitator, Sprayball, Tri-Clover Air Valve (Approximately 16 ft. L x 100" W) (SK4) |
 |
121 |
19 |
Valve Tri-Clover 2" S/S Air Valve Cluster with Model 361TR Valves |
 |
122 |
5 |
Valve Tri-Clover and Waukesha 2" S/S Air Valve Cluster with Model 361TR Valves |
 |
123 |
9 |
Valve Tri-Clover 2" S/S Air Valve Cluster, Most with 361TR Air Valves |
 |
124 |
2 |
Valve Tri-Clover 2" S/S Air Valve Cluster, Model 361 Valve |
 |
125 |
1 |
Klenzade S/S Control Panel with Solenoid |
 |
126 |
1 |
Tri-Clover 5 hp Centrifugal Pump, Model C216 with 2-1/2" x 1-1/2" Clamp Type S/S Head and 1725 RPM Motor |
 |
128 |
1 |
***** BULK BID LOT #129 TO LOT #134 - COMPLETE BATCH PROCESSING SYSTEM INCLUDES DCI 1,900 GAL. AND WALKER 1,000 GAL. TANKS WITH LOAD CELLS, PUMP, AIR VALVES AND WALK PLATFORM ***** |
     |
129 |
1 |
DCI 1,900 Gal. Dome-Top Cone-Bottom Processor, S/N 86-D-31477-A with Bottom and Side Sweep Scrape Surface Agitator, SEW Euro Drive and 2-Speed Agitator |
 |
129A |
1 |
Spare SEW Motor, 3/6 hp, 670/1780 RPM and 86.52 Ratio Drive |
     |
130 |
1 |
Walker 1,000 Gal. Dome-Top S/S Blend Tank, Model BLEND, S/N 3511 with 304 Stainless, Concave Bottom, Bottom Sweep Agitator, Baffle, Sprayball, Mounted on Load Cells with Mettler Toledo Read-Out and Plug Valve |
 |
131 |
1 |
Tri-Clover 7.5 hp Centrifugal Pump, Model C216 with 2" x 1-1/2" Clamp Type S/S Head and 3450 RPM Motor |
  |
132 |
1 |
Related Batch System 2" Installed Valves and Piping including Tri-Clover 3-Way Long Stem Air Valve, (3) Ball Valves, Plug Valve, Top Line Air Actuated Ball Valve with Related Piping (NOTE: Includes Piping Surrounding Batch System Only) |
 |
133 |
1 |
100" W x 72" W x 52" H Walk Platform |
 |
134 |
1 |
36" x 36" S/S Exhaust Hood with 11" Hook Up (NOTE: Must Be Cut At Ceiling Only) |
     |
136 |
1 |
2005 Mueller Approximately 2,000 Gal. Dome-Top S/S Processor, Model PCP, S/N 334129-1 (BM #6) - Complete with Concave Bottom Side and Bottom Sweep Agitator, Baffle, Sprayballs, 2-Speed Agitator, Stainless Exterior, Bottom Design Temp. 250 Degree F Steam and Water (Approximately 100" W x 138" H) |
    |
137 |
1 |
2005 Mueller Approximately 2,000 Gal. Dome-Top S/S Processor, Model PCP, S/N 334129-2 (BM #2) - Complete with Concave Bottom Side and Bottom Sweep Agitator, Baffle, Sprayballs, 2-Speed Agitator, Stainless Exterior, Bottom Design Temp. 250 Degree F Steam and Water (Approximately 100" W x 138" H) |
     |
138 |
1 |
Cherry Burrell 2,000 Gal. Dome-Top S/S Processor, Model EPDB, S/N 2000-67-1450 - Complete with Bottom and Side Sweep Agitator, Sprayball, Stainless Exterior Bottom (Approximately 12 ft. H x 88" W) (BM-7) |
   |
139 |
1 |
Crepaco 1,500 Gal. Dome-Top S/S Processor, S/N C-2693 (BM1) - Complete with Bottom and Side Sweep Agitator, Baffle, Sprayball, 2-Speed Agitator and Chart Recorder (Approximately 115" H x 94" W) |
    |
140 |
1 |
Crepaco 1,500 Gal. Dome-Top S/S Processor, S/N C-2694 (BM5) - Complete with Bottom and Side Sweep Agitator, Baffle, Sprayball, 2-Speed Agitator and Chart Recorder (Approximately 115" H x 94" W) |
    |
141 |
1 |
Crepaco 1,500 Gal. Dome-Top S/S Processor, S/N D-4000 (BM4) - Complete with Bottom and Side Sweep Agitator, Baffle, Sprayball, 2-Speed Agitator and Chart Recorder (Approximately 115" H x 94" W) |
    |
142 |
1 |
Crepaco 1,500 Gal. Dome-Top S/S Processor, S/N 9730 (BM3) - Complete with Bottom and Side Sweep Agitator, Baffle, Sprayball, 2-Speed Agitator and Chart Recorder (Approximately 115" H x 94" W) |
   |
143 |
1 |
2000 Walker 4,000 Gal. Horizontal Ammonia Refrigerated S/S Tank, Model HHT, S/N SPG-21823 - Complete with 50 sq.ft. Jacket Area, 150 psi, 304 Stainless, Vertical Agitator, Sprayballs, Tri-Clover Air Valve, Plug Valve with S/S Front (Approximately 104" W x 10 ft. L) (PT #7) |
   |
144 |
1 |
DCI 4,000 Gal. Horizontal Ammonia Refrigerated S/S Tank, S/N JS-2438-B (PT #8) - Complete with Vertical Agitator, Sprayballs, Tri-Clover Air Valve and S/S Front (Approximately 104" W x 10 ft. L) (Note: Jacket Never Hooked Up) |
   |
145 |
1 |
DCI 4,000 Gal. Horizontal Ammonia Refrigerated S/S Tank, S/N JS-2438-A (PT #9) - Complete with Vertical Agitator, Sprayballs, Tri-Clover Air Valve and S/S Front (Approximately 104" W x 10 ft. L) (Note: Jacket Never Hooked Up) |
   |
146 |
1 |
1997 Walker 7,500 Gal. Horizontal Ammonia Refrigerated S/S Tank, Model 12188, S/N HHT-6509-R - Complete with 48 sq.ft. Jacketed Area, 150 psi, Dual Vertical Agitator, Air Valve and S/S Front (Approximately 104" W x 18 ft. L) (PT #10) |
   |
147 |
1 |
Walker 12,000 Gal. Horizontal Ammonia Refrigerated S/S Tank - Complete with Dual Vertical Agitator, Air Valve and S/S Front (Approximately 104" W x 30 ft. L) (PT #11) |
 |
148 |
1 |
Tri-Clover Approximately 3 hp Centrifugal Pump, Model C218 with 3" x 1-1/2" Clamp Type S/S Head |
 |
149 |
1 |
Tri-Clover Approximately 1 hp Centrifugal Pump, Model C216 with 2-1/2" x 1-1/2" Clamp Type S/S Head and 1725 RPM Motor |
 |
150 |
1 |
Tri-Clover 2 hp Centrifugal Pump, Model C216 with 2" x 1-1/2" Clamp Type S/S Head and 1725 RPM Motor |
 |
151 |
1 |
Tri-Clover 10 hp Centrifugal Pump with 2" x 1-1/2" Clamp Type S/S Head with Baldor 1740 RPM S/S Clad Motor |
 |
152 |
1 |
Anderson 4-Station Tank Level Control System, Model GF114T22, S/N 0009402 |
    |
153 |
1 |
(3) Allen Bradley PLC Controllers includes PLC 5/40 Rack with (12) Cards, PLC 5/20 Rack with (16) Cards and SLC 5/02 with (4) Cards includes Panelview 1400e Display and Panelview 550 Display (NOTE: Does Not include any components associated with HTST Systems) |
|
|
154 |
4 |
VFD's including (3) Allen Bradley PowerFlex 4 and Yaskawa GPD 506/PR |
   |
155 |
1 |
Remaining 1-1/2" and 2" S/S Process Piping throughout Processing Room includes (2) Tri-Clover 2" 2-Way and 3-Way Air Valves, (6) Plug Valves, Hangers and Fittings (NOTE: Does Not Include Any Piping Associated with HTST System, Cream System and Batch System |
 |
156 |
1 |
6 ft. L x 19" W x 13" Deep S/S Wash Trough |
 |
157 |
39 |
Valve 2" S/S Air Valve Cluster, 761 and 361 Series Valves with Solenoid Control Panel |
 |
158 |
1 |
Anderson ACR700 Chart Recorder, Woods E-Trac AC Inverter and Anderson Pressure Read-Out Controller |
   |
165 |
1 |
Federal 21-Valve Rotary Filler, S/N 1075G21 5RA594 with Square 32 oz., Half Gal. and Gal. Change Parts including 5-Head Snap Capper and Tri-Clover Air Valve |
 |
166 |
1 |
Pallet Assorted Federal Filler Parts including (2) Index Drives, Shafts, Brass Bushings, Filler Tubes and Spring Assemblies |
 |
167 |
1 |
16" S/S Cap Feeder - Complete with Feed Rail, Enclosure with Bin, Feeder and Stand (On 3-Pallets) |
  |
168 |
1 |
Cherry Burrell H100 Half Gal. Carton Filler, S/N 3129 with 2-Lanes |
 |
169 |
1 |
(2) Pallets Assorted Cherry Burrell H100 and Other Carton Filler Parts including: Clutch, Drive, Various Bracketing, Chain, Gaskets, Etc. |
 |
170 |
1 |
42" L x 18" W x 12" Deep S/S COP Tank |
 |
171 |
1 |
Fairbanks Digital Platform Scale, Model H90-5200 with 10 x 10 Stainless Platform |
 |
172 |
1 |
Tri-Clover Tri-Blender, Model F3218MD - B60, S/N R3450 with 10 hp Motor, All S/S Frame |
 |
173 |
49 |
Valve Tri-Clover 2" Air Valve Cluster, 361 Series Valves includes Solenoid Control Panel |
 |
177 |
11 |
Valve Waukesha 2-1/2" S/S Air Valve Cluster with Model VALVE 61C2.5" - 6 Air Valves (Asset #07294) |
 |
180 |
1 |
Cherry Burrell NEP-210A Half Pint and Small Carton Filler, S/N 1117 |
 |
181 |
1 |
Hydraulic Case Stacker - Complete with Allen Bradley SLC150 PLC Controller with PowerFlex 4 VFD |
 |
182 |
1 |
Cannon Hydraulic Case Stacker - Complete with Allen Bradley SLC 150 PLC Controller |
 |
183 |
1 |
50" L x 23" W x 19" Deep Portable S/S COP Tank with Purity Centrifugal Pump (Asset #07283) |
 |
184 |
1 |
42" L x 17" W x 12" Deep S/S Portable COP Tank (Asset #07282) |
 |
185 |
1 |
Liqui-Box Liquimatic 2-Head Bag N Box Filler, Model 1000C2T0, S/N 91177 - Complete with Cutler Hammer D100A Controller with Butch Controller |
 |
186 |
1 |
Bemistaper Adjustable Case Sealer, Model 1018SA, S/N 181101 8SA0994 |
 |
187 |
1 |
Loma IQ S/S Metal Detector, S/N KIMD08192 with 7" W x 7" H Opening - Mounted on 5 ft. L Conveyor with 5" W Plastic Chain, Drive and Digital Read-Out |
 |
188 |
1 |
Loma IQ2 S/S Metal Detector, S/N KIMD08194 with 7" W x 7" H Opening, Mounted on 3 ft. L Conveyor with 5" W Plastic Chain, Drive and Digital Read-Out |
 |
189 |
1 |
VideoJet Ink Jet Coder, Excel 170i Series, S/N 992510007WD (Asset #07148) |
 |
190 |
1 |
VideoJet Ink Jet Coder, Excel 100 Series, S/N 89L06004 (Asset #07147) |
 |
191 |
1 |
VideoJet Ink Jet Coder, Excel 100 Series (Asset #07146) |
 |
192 |
1 |
APV 25" S/S Plate Press, Model SR15-S, S/N 23404-2 with (41) Plates and Tri-Clover 1-1/2" S/S Air Valve |
 |
193 |
1 |
2" Installed S/S Piping Throughout Filling Room includes (8) Plug Valves in Manifold, Butterfly Valves, Fittings and Hangers (NOTE: Located Throughout 3 Rooms Only) |
 |
194 |
1 |
Klenzade Portable S/S Foamer |
 |
195 |
1 |
Klenzade Portable S/S Foamer |
 |
196 |
1 |
Klenzade Portable S/S Foamer |
 |
197 |
1 |
Johnson-Diversey Shur-Foam P15 PL Foamer |
 |
198 |
1 |
Johnson-Diversey Shur-Foam P15 PL Foamer |
 |
199 |
1 |
Tri-Clover 3 hp Centrifugal Pump with 2" x 1-1/2" Clamp Type S/S Head and 1750 RPM Motor |
 |
200 |
1 |
18" W x 40" L x 18" Deep S/S Tank |
 |
201 |
1 |
18" W x 40" L x 18" Deep S/S Tank |
 |
202 |
1 |
S/S Rack |
 |
203 |
1 |
APV 25" H S/S Plate Press, Model SR15S, S/N 23404-1 with (40) Plates |
 |
204 |
1 |
Axon 36" L S/S Heat Tunnel with 7-1/2" W x 7" H Opening |
 |
205 |
1 |
CMS Gilbreth 40" L Heat Tunnel, S/N 23271-04 |
 |
206 |
1 |
Roach 5 ft. L Belt Conveyor System, S/N 350293 with 12" W Belt with Drive |
 |
207 |
1 |
Roach 5 ft. L Belt Conveyor System, S/N 350294 with 12" W Belt with Drive |
 |
208 |
1 |
24-1/2" W x 75" L x 21" Deep S/S Jet Spray Wash Trough with Tri-Clover Centrifugal Pump |
 |
209 |
1 |
21" W x 74" L x 17" Deep S/S Jet Spray Wash Trough with Ampco 5 hp Centrifugal Pump (Asset #07140) |
 |
210 |
1 |
36" W x 72" L x 17" Deep S/S Wash Trough (Asset #07141) |
 |
211 |
1 |
2004 Del Portable Ozone Sanitation System, Model MPI 300, S/N 08040343, 3.2 to 3.4 GPM, Single Phase (Asset #07292) |
 |
221 |
1 |
30" W x 38" L x 26" H Portable S/S Tank with Plug Valve |
 |
222 |
1 |
26" W x 35" L x 34" H Portable S/S Tank with Plug Valve |
 |
223 |
1 |
27" W x 38" L x 28" H Portable S/S Tank with Plug Valve |
 |
224 |
1 |
24" W x 36" L x 31" Deep Portable S/S Tank with Plug Valve |
 |
225 |
1 |
24" W x 30" Deep S/S Tank - Mounted on S/S Skid with Tri-Clover 2 hp Centrifugal Pump |
 |
226 |
1 |
24" H x 16" W S/S Tank (Asset #07214) |
 |
227 |
1 |
15" H x 13" W Portable S/S Sanitary Tank with Lid |
 |
228 |
1 |
15" H x 13" W Portable S/S Sanitary Tank with Lid |
 |
229 |
1 |
15" H x 13" W Portable S/S Sanitary Tank with Lid |
 |
230 |
3 |
15" H x 13" W Portable S/S Sanitary Tanks (NOTE: No Lids or Wheels) |
 |
231 |
1 |
Chicago Stainless 30" W x 36" Deep Jacketed S/S Tank with Hinged Lid (Asset #07284) |
 |
234 |
1 |
Sine Positive Pump, Model MR-130, S/N 108811104 - Complete with 3" Clamp Type S/S Head, 2 hp Motor with Dodge 7.6 Ratio Drive, Mounted on Portable S/S Frame with Connectors (Asset #07139) |
 |
235 |
1 |
Sine Positive Pump, Model MR130-NNT, S/N 97711196 - Complete with 3" Clamp Type S/S Head, Approximately 1 hp Motor, 7.6 Ratio Gear Drive, Mounted on Portable S/S Frame with Connectors (Asset #07142) |
 |
238 |
1 |
Waukesha Size 130 Positive Displacement Pump, S/N 6432SS with 3" Threaded S/S Head, 10 hp Motor, Dodge 6.311-1 Ratio Drive, Mounted on S/S Frame |
 |
239 |
1 |
APV Crepaco Size R6R Positive Displacement Pump, S/N E-1108 with 2-1/2" Threaded S/S Head, SEW 10 hp Variable Speed Drive, Mounted on Portable S/S Frame |
 |
240 |
1 |
APV Crepaco Size R6R Positive Displacement Pump, S/N E-1110 with 2-1/2" Threaded S/S Head, SEW 10 hp Variable Speed Drive |
 |
246 |
1 |
Continental 18 ft. L All S/S Case Washer, S/N D30802 - Complete with Circulating Pumps, Related Valves, Piping and Controls, Mounted on 6 ft. 6" H Support Rack includes Aluminum Walk Platform |
 |
247 |
1 |
2002 Cannon 10 ft. All S/S Hydraulic Case Top-Out Destacker, Model TOUS19395-03, S/N 780 with Allen Bradley Micrologix 1200 PLC Controls |
 |
249 |
1 |
Continental 18 ft. L All S/S Case Washer, S/N D30852 - Complete with Circulating Pumps, Related Valves, Piping and Controls, Mounted on 6 ft. 6" H Support Rack includes S/S Walk Platform |
 |
250 |
1 |
10 ft. Hydraulic Case Top-Out Destacker |
  |
251 |
1 |
Approximately 245 ft. L Overhead Case Conveyor System - Complete with 15" W All S/S Pan with Rex Series 3488 Chain includes Straight Sections, Bends, Micro-Switches, Drives, Lane Diverters with Ceiling Supports (NOTE: Includes All Tracking From Case Washers Ending in Filling Room) |
 |
255 |
1 |
2001 Customs Metal Design 11 ft. L x 4 ft. W Jug Debagging Table, Model SDA-1000RL, S/N SD-5047 - 6-01 with Controls |
 |
256 |
1 |
53" L x 48" W Manual S/S Debagging Table |
 |
257 |
1 |
6 ft. L Portable S/S Belt Conveyor with 9-1/2" W Belt (Asset #07259) |
  |
258 |
1 |
New England 48" W Bottle Unscrambler, Model NEHA48, S/N 2387 with Controls |
 |
259 |
1 |
New England 8 ft. Elevated S/S Bin Hopper, Model H/E-20, S/N 1-8555 - Complete with 18" W Plastic Chain with Drive, 51" W x 51" W x 36" Deep |
|
|
261 |
1 |
..... ***** THE NEXT 12 LOTS ARE LOCATED AT VARIOUS DEAN FOODS LOCATIONS AND WILL BE SOLD AT THIS TIME BY POWER POINT IN FILLING ROOM ***** |
|
|
262 |
1 |
***** LOT #263 - Scanima Spiral Tunnel Located at Dan Morton LLC - 3333 Dan Morton Drive, Dallas, TX 75236-1066 ***** |
  |
263 |
1 |
New - Never Installed Scanima Spiral Tunnel - Supplied By Tetra Pak Hoyer. Designed for 2,000 GPH Ice Cream in Squaround Half Gal. Packages or 16,000 PPH. 44" W Belt (41" Effective Width), 1,256 ft. Belt Length, 3,724 ft. Belt Area, 3.25 - 22 ft./Min. Variable Belt Speed, 17 Tiers, 7" Max. Product Height, Purchased for $700,000.00 (*SUBJECT TO CONFIRMATION*) |
|
|
268 |
1 |
***** LOT #269 - Glacier Hardening System Located at Meadow Gold Dairy, 37 W 1820 S, Salt Lake City, UT 84104 ***** |
|
|
269 |
1 |
Glacier Hardening System, Model 600-E includes Ammonia Evaporator with Related Refrigeration, Conveyors, Ran at -60 Degree F (*SUBJECT TO CONFIRMATION*) |
|
|
274 |
1 |
***** LOT #276 to Lot #280 Cheese Vats Located at 4429 Bishop Lane, Louisville, KY ***** |
|
|
275 |
1 |
***** BULK BID LOT #276 TO LOT #280 - (5) STOELTING CHEESE VATS WITH RELATED AUXILIARY EQUIPMENT ***** |
   |
276 |
1 |
Stoelting Cheese Vat - ST223 (Asset #07134) |
   |
277 |
1 |
Stoelting Cheese Vat - ST224 (Asset #07135) |
   |
278 |
1 |
Stoelting Cheese Vat - ST225 (Asset #07136) |
   |
279 |
1 |
Stoelting Cheese Vat - ST226 (Asset #07137) |
   |
280 |
1 |
Stoelting Cheese Vat - ST227 (Asset #07138) |
|
|
296 |
1 |
***** LOT #297 to Lot #301 Located at Pet Dairy - 2320 Turnpike Road, Portsmouth, Virginia 23704 ***** |
 |
297 |
1 |
Walker 8,000 Gal. S/S Tank with (2) Horizontal Agitators and Stainless Exterior |
   |
298 |
1 |
Cherry Burrell N7 Eco Small Section Carton Filling Machine, S/N 1209 |
    |
299 |
1 |
Cherry Burrell 210A Small Section Carton Filling Machine, S/N 1122 |
 |
300 |
1 |
Cannon Hydraulic/Pneumatic S/S Caser |
 |
301 |
1 |
Cannon Hydraulic/Pneumatic S/S Caser, Model 110-1098683, S/N 110-1509 with Micrologix 1200 PLC Controls |
   |
325 |
1 |
***** BULK BID LOT #326 TO LOT #344 - COMPLETE INSTALLED 9,000 LB. AMMONIA REFRIGERATION SYSTEM ***** |
 |
326 |
1 |
Vilter 8-Cylinder 100 hp Reciprocating Compressor, Size A11K448B, S/N 33968 with Benshaw Starter (Unit #3) |
 |
327 |
1 |
Vilter 8-Cylinder 100 hp Reciprocating Compressor, Size AK448, Model VMC-440, S/N R45240 with Allis Chalmers Starter (Unit #2) |
 |
328 |
1 |
Vilter 6-Cylinder 60 hp Reciprocating Compressor, Size 446, S/N 3268ARC with Motortronics Starter (Unit #1) |
 |
329 |
1 |
Vilter 6-Cylinder 60 hp Reciprocating Compressor, Size AK446, S/N R240 / H16950 with Allen Bradley Starter (Unit #5) |
 |
330 |
1 |
Vilter 4-Cylinder 50 hp Reciprocating Compressor, Size A12K444, Model VMC 440, S/N 33832 with Allen Bradley Starter (Unit #6) |
 |
331 |
1 |
Crepaco 260-Ton Evaporative Condenser, Model PMC-395, S/N 824283 (Unit A) |
 |
332 |
1 |
1994 FES 103" H x 56" W Vertical Ammonia Receiver, S/N 940368 with Oil Separator and Pump |
    |
333 |
1 |
Ammonia Refrigeration Control Panels Complete with Allen Bradley SLC 505 PLC Controller with Panelview 1000 includes Uni-Temp with Q-Term-J10 Digital Read-Outs and Manning Leak Detection Monitoring System, Model GM-1 |
|
|
337 |
1 |
2001 Krack 2-Fan Ammonia Blower, Model PCS-2S - 5110-4 - 1-1/2-DXA-HGC-IP, 230/3/60 V, Hot Gas Coil Defrost with Insulated Drain Pan, 21,505 BTU's/TD (Located in Cooler) |
|
|
338 |
1 |
2001 Krack 42" Single Fan Ammonia Blower, Model SPCS- 1L-32-4-3 - DXA-HGC-IP, 203/3/60 V, Hot Gas Coil Defrost with Insulated Drain Pan, 16,190 BTU's/TD (Located in Cooler) |
 |
339 |
1 |
2001 Krack 42" Single Fan Ammonia Blower, Model SPCS- 1L-32-4-3 - DXA-HGC-IP, 203/3/60 V, Hot Gas Coil Defrost with Insulated Drain Pan, 16,190 BTU's/TD (Located in Cooler) |
 |
340 |
1 |
Evapco 3-Fan Ammonia Blower, Model NTX3-2664-033P, S/N 940243RH, 230/3/60 V, Hot Gas Oil Defrost, 126,000 BTU 15 TDD (Located in Old Cooler) |
 |
341 |
1 |
Evapco 3-Fan Ammonia Blower, Model NTX3-2664-033P, S/N 940242RH, 230/3/60 V, Hot Gas Oil Defrost, 126,000 BTU 15 TDD (Located in Old Cooler) |
 |
342 |
1 |
Evapco 4-Fan Ammonia Blower, Model NTX4 - 2284-033P, S/N 940245RM, 230/3/60 V, Hot Gas Coil Defrost, 126,000 BTU 15TDD (Located in Cooler) |
 |
343 |
1 |
Evapco 4-Fan Ammonia Blower, Model NTX4 - 2284-033P, S/N 940244RM, 230/3/60 V, Hot Gas Coil Defrost, 126,000 BTU 15TDD (Located in Cooler) |
 |
344 |
1 |
Krack 3-Fan Ammonia Blower, Model DTX3S - 720-HGC - DXA, S/N 375142C (Located in Dock Area) |
 |
347 |
1 |
2004 Chester Jenson 70,000-Ton (30 ft. L x 130" W x 88" H) Ammonia Ice Builder, Model XM-18-10-65, S/N 1725 with Receiver, Pumps and Roots 3 hp Blower |
 |
348 |
1 |
31 ft. L x 9 ft. 7" W x 100" H Ammonia Ice Builder with Receiver and Pumps |
 |
352 |
1 |
10 ft. 5" L x 36" W Shell and Tube Glycol System - Complete with Purity 500 Gal. Hinged Lid S/S Tank and (2) Circulating Pumps (NOTE: Chilled by Ammonia) |
 |
355 |
1 |
2001 Vilter 100 hp Screw Ammonia Compressor, Model VSS751 A025228 BPAAAN, S/N 2069, Order #K18665-1 with Vision Micro-Controller Digital Read-Out (Asset #07288) |
 |
356 |
1 |
Dunham-Bush 200 hp Screw Ammonia Compressor, Model 1615DHR 4V0E0EM 0010, S/N 93F800111D - Complete with M & M Refrigeration Upgraded Digital Control Panel and Toshiba Starter (Compressor #3) |
 |
357 |
1 |
Frick 200 hp Screw Ammonia Compressor, Model RWB40, S/N 1615DHR 4V0DX2966 - Complete with M & M Refrigeration Upgraded Digital Control Panel and Toshiba Starter (Compressor #2) |
 |
358 |
1 |
Frick 200 hp Screw Ammonia Compressor, Model RWB40, S/N 1615DHR 4V0DX2965 - Complete with M & M Refrigeration Upgraded Digital Control Panel and Toshiba Starter (Compressor #1) |
 |
359 |
1 |
Vilter 8-Cylinder 100 hp Reciprocating Ammonia Compressor, Type VMC440, Size A12K448B, Order #K24160, S/N 33866 (Asset #07279) |
 |
360 |
1 |
Vilter 6-Cylinder Reciprocating Ammonia Compressor, Type VMC450XL, Size A10K456XLB, Order #F83493, S/N 63862 |
 |
361 |
1 |
Marathon 125 hp Ammonia Compressor Motor, 1780 RPM, 230 PWS V, 3 Phase |
 |
362 |
1 |
Gould Century 100 hp Ammonia Compressor Motor, 1175 RPM, 230/460 V, 3 Phase |
 |
363 |
1 |
1999 RVS/Evapco 12 ft. L x 24" W Ammonia Receiver, Board #12521, S/N 990837-S |
 |
364 |
1 |
Toshiba 75 hp Motor with 1185 RPM, 230/460 V, 3 Phase |
 |
365 |
1 |
Lincoln 100 hp Motor, 1775 RPM, 230/460 V, 3 Phase |
 |
366 |
1 |
Lincoln 100 hp Motor, 1775 RPM, 230/460 V, 3 Phase |
 |
367 |
1 |
ESSA 200 hp Motor, 1780 RPM, 460 V, 3 Phase |
 |
374 |
1 |
2001 FlatPlate 20" H S/S Ammonia Plate Chiller, S/N F020AN 04001001 with (20) Plates (Asset #07262) |
 |
375 |
1 |
Viking 3 hp Ammonia Pump, Model HJ4195, S/N 11071308 (Asset #07240) |
 |
376 |
1 |
Baldor Size 8 Soft Starter Panel, S/N 1597FX076, Cat #MB8X, 600 Vac, 3 Phase |
|
|
377 |
1 |
2001 GEA/FES System Inc. 2-Door S/S Ammonia Control Panel, Model System Panel, S/N 01150108 - Complete with Micro 3 Touchpad Digital Controller (Asset #07205) |
 |
378 |
1 |
Vilter 6-Cylinder Reciprocating Ammonia Compressor Head, Model VMC440, Size AK446, Order #H81707, S/N R4874 |
 |
379 |
1 |
Vilter 6-Cylinder Reciprocating Ammonia Compressor Head, Model VMC440, Size AK446, Order #H67475, S/N 33618 |
 |
380 |
1 |
(2) Pallets Assorted Vilter and Other Ammonia Valves including Parker Solenoids, Sporlan Traps, Gauges, Hansen Parts, Flange Bolts, Etc. |
 |
381 |
1 |
New Baldor 100 hp Ammonia Compressor Motor, 1775 RPM, 230/460 V, 3 Phase |
 |
382 |
1 |
Lincoln 75 hp Ammonia Compressor Motor, 1175 RPM, 230/460 V, 3 Phase |
 |
383 |
1 |
Westinghouse 40 hp Ammonia Compressor Motor, 1767 RPM, 220/440 V, 3 Phase |
 |
384 |
1 |
Dayton 3/4 hp Oil Pump, Model 6PA13, S/N 07093 10005, Single Phase, Mounted on Portable Stainless Cart |
 |
385 |
1 |
1 hp Oil Pump, Single Phase |
|
|
388 |
1 |
***** BULK BID LOT #389 TO LOT #392 - PLANT AIR COMPRESSOR SYSTEM - COMPLETE WITH KAESER SCREW AIR COMPRESSOR WITH REFRIGERATED AIR DRYER AND RECEIVER ***** |
 |
389 |
1 |
1999 Kaeser 75 hp Screw Air Compressor, Model CS91, S/N 1007, 230 V, 3 Phase, 145 psi |
 |
390 |
1 |
2003 Kaeser Refrigerated Air Dryer, Model TE91, S/N 1015 with Filter System and Approximately 7 ft. H x 36" W Vertical Air Receiver |
 |
391 |
1 |
Approximately 14 ft L x 54" W Horizontal Air Receiver with Filter System |
 |
392 |
1 |
Approximately 7 ft. H x 36" W Vertical Air Receiver |
 |
395 |
1 |
Vickers 30 hp Hydraulic Pump with Reservoir (#1) |
 |
396 |
1 |
Vickers 20 hp Hydraulic Pump with Reservoir (#2) |
 |
397 |
1 |
Vickers 20 hp Hydraulic Pump with Reservoir (#3) |
  |
398 |
1 |
Johnson Diversey Bulk Chemical Delivery System - Complete with Approximately 1,500 Gal. Vertical Chemical Storage Tank with Containment, Chemical Feed Pumps, 2007 Johnson Diversey Chemical Controller System, Type DTECO N0MICS7 - 200-12 (1251854Z00), S/N 922003 and Siemens S7-200 PLC Controller |
 |
402 |
1 |
6,000 Gal. Vertical Sucrose/Sugar Tank - Complete with UV System, Bottom Mounted Electric Heater, Aluminum Clad, Epoxy Lined, Insulated (Approximately 16 ft. 3" H x 10 ft. W) |
 |
403 |
1 |
Conair 98,000 lb. Resin Silo, S/N 10174-1 (Approximately 10 ft. W x 40 ft. H) |
   |
414 |
1 |
2004 JR. Automation Tech Dual Lane 12-Position S/S Case Packer, Job #119240 - Complete with Allen Bradley SLC 5/03 PLC Controller with Panelview Plus 700 Display, Includes 1-Conveyor Section in Crate, 14" W Conveyor Belt, Some Change Parts (Asset #13984) (Used For Packaging Sour Cream - Pick and Place) |
   |
415 |
1 |
2004 JR. Automation Tech Dual Lane 12-Position S/S Case Packer, Job #119240 - Complete with Allen Bradley SLC 5/03 PLC Controller with Panelview Plus 700 Display, Includes 1-Conveyor Section in Crate, 14" W Conveyor Belt, Some Change Parts (Asset #13972) (Used for Packaging Sourt Cream - Pick and Place) |
    |
416 |
1 |
2004 Pearson Packaging Adjustable Case Sealer, Model R235, S/N 2004023 510319 - Complete with Nordson ProBlue 10 Gluer, Micrologix 1500 PLC Controller with Panelview 500 Display and Some Spare Parts (Asset #13970) |
 |
417 |
1 |
WCB Half Gal. Ice Cream Filler, Type Technohoy - 588C, S/N 03 - Complete with Hot Melt Gluer, Micro-Set Multi-Scan Controller, Allen Bradley 5/01 PLC Controller, Emerson FX490 Positioning Servo Drive with Electrocam 500 Series Programmable Limit Switch (Asset #07195) |
  |
418 |
1 |
WCB/Cherry Burrell 3-Barrel Ice Cream Freezer, Model 3D90, S/N 5308 - Complete with Upgraded Waukesha Pumps with Controls (Asset #07171) |
 |
422 |
1 |
APV Crepaco 3-Barrel 300 GPH Ice Cream Freezer, Model 304, S/N D4081W 304G (Asset #07172) |
 |
423 |
1 |
Cherry Burrell VS200 Ice Cream Freezer with S/S Exterior, Allen Bradley VFD and Pumps (Note: Dasher, Mutator and Blades Missing) (Asset #07186) |
 |
426 |
1 |
Anderson Ice Cream Boxer, Model 592-2, S/N 32964 with Nordson Vista Gluer (Asset #07180) |
 |
427 |
1 |
Crepaco Model FF Fruit Feeder, S/N 2149 (Asset #07213) |
 |
428 |
1 |
APV S420 Fruit Feeder, S/N G-3000-S-420 with Allen Bradley PowerFlex VFD's (NOTE: Blending Tube Missing) (Asset #07179) |
 |
429 |
1 |
Bemis All S/S Adjustable Top Case Sealer with (2) Allen Bradley PowerFlex 40 VFD's (Used on 2 to 5 lb. Products) (Asset #07151) |
 |
430 |
1 |
Wepackit All S/S Box Erector, Model 720XLM, S/N 720XLM-2546 with Allen Bradley Micrologix 1000 PLC Controls (Used on 5 lb.) (Asset #13977) |
 |
431 |
1 |
Kusel Cheese Product Transfer System, S/N PTS-79414 - Complete with Vacuum Chamber with 3" Connector, Tri-Clover Air Valves, Filters and Allen Bradley SLC/500 PLC Controller (Asset #13439) |
 |
436 |
1 |
8 ft. H x 23" W All S/S Lid Unscrambler, Model 3100, S/N RU-602, Type CUF3100 with Seco DC Drive (Asset #07185) |
 |
437 |
1 |
Stormax Novelty Stick Feeder - Complete with Allen Bradley SLC 500 PLC Controller with UTICOR PMD150 Display (Asset #07174) |
 |
439 |
1 |
Great Lakes S/S Overwrapper, Model 708E-27, S/N 708E - 27-BO286 with Controls and Some Spare Parts (Asset #07184) |
 |
440 |
1 |
Great Lakes All S/S Shrink Tunnel - Complete with 28" W x 16" H Opening (Asset #07177) |
 |
441 |
1 |
Aprac S/S Wrapper/Shrink Tunnel, Model 108 - 24SS, S/N 1280 with 28" W x 14" H Opening (Asset #07200) |
 |
442 |
1 |
Great Lakes S/S Overwrapper - Complete with Allen Bradley SLC 500 PLC Controller with Display (Used for Square Half Gal. Ice Cream) (Asset #07181) |
 |
443 |
1 |
Great Lakes S/S Shrink Tunnel, Model MS102245, S/N HV1147 with 20" W x 15" H Opening |
   |
444 |
1 |
2004 JR. Automation Technologies S/S Case Packer, Job #118310, 12-Position Dual Cane - Complete Allen Bradley SLC 5/03 PLC Controller, Control Technologies MP-2500 Controller, Allen Bradley VFD's with 14" W Conveyor Belts (Pick & Place) (Asset #07150) |
 |
445 |
1 |
Great Lakes S/S Shrink Tunnel, Model 708TC, S/N T0778 with 28" W x 13" H Product Opening (Asset #07182) |
 |
446 |
3 |
Conveyor Specialties 20 hp Hydraulic Pumps, Model 6C, S/N's 462, 463 and 464 with Reservoirs Mounted on Frame with Racine Hydraulic Pumps (Asset #07196) |
 |
447 |
1 |
Huhtamaki 56 oz. 8-Station Rotary Ice Cream Filler with Omron Sysmac C28K PLC Controls (Asset #07183) |
 |
450 |
1 |
3M Top and Bottom 2A Adjustable Case Sealer, Model 18000, S/N 1089 (Asset #07197) |
 |
451 |
1 |
(2) Sections Galvanized Power Roller Conveyor with Drive, 14 ft. and 10 ft. Sections x 10" W |
 |
452 |
1 |
DCE Unimaster 8 ft. H x 30" W x 30" W Dust Collector System, Type UMA 154G5AD, S/N 87-1283 (Asset #07194) |
 |
453 |
1 |
Bell and Gossett 24" L x 8" W Shell and Tube Heat Exchanger, S/N 93Y78302-01, Mounted on Rack with Pump and Condensate Tank (Asset #07188) |
 |
454 |
1 |
Descon 7 ft. L S/S Product Conveyor Section, 7-1/2" W Plastic Chain, Adjustable Side Rails and Drive |
 |
455 |
1 |
Skate Conveyor Section - 12" W Rollers |
 |
457 |
1 |
Custom Metal Designs 56" L S/S Product Conveyor System with 3-1/4" W Plastic Chain and Drive (Asset #07201) |
 |
458 |
1 |
9 ft. L Portable S/S Product Conveyor System - 4-1/2" W Chain |
 |
459 |
1 |
Dairy Conveyor Corp. 70" L S/S Product Conveyor Section - Complete with 7-1/2" Total W Plastic Chain includes Dual 3-1/4" W Plastic Chain with Side Rails, Drive, Pneumatic Stops and Controls (Asset #07229) |
 |
460 |
1 |
10 ft. L Custom Metal Designs Portable S/S Product Conveyor, 10" W Plastic Chain with Drive (Asset #07198) |
 |
461 |
1 |
Mathews 6 ft. L. Power Belt Conveyor Section with 17" W Belt and Drive (Asset #07261) |
 |
464 |
1 |
Anderson Shrink Wrapper/Tunnel, Model 465, S/N 33221 (Asset #07167 |
 |
467 |
1 |
Cintex S/S Metal Detector System, Model CS2048, S/N 46379 with 12" W x 7-1/2" H Product Opening, Mounted on 51" L Portable Conveyor with Plastic Chain and Drive (Asset #07178) |
 |
468 |
1 |
Tetra/Hoyer Fruit Feeder, Type FF4000, S/N 201-3211 (Note: Missing Some Parts - "As-Is") (Asset #07176) |
 |
469 |
1 |
Cherry Burrell Fruit Feeder, Model HCIF, S/N 2754 (Note: Missing Some Parts) (Asset #07175) |
 |
470 |
1 |
Crepaco Antique Fruit Feeder, S/N 8211 |
 |
471 |
1 |
Formost Novelty Wrapper with Saftronics PC7 VFD (Note: Missing Some Parts) (Asset #07243) |
 |
472 |
1 |
Flanders S/S Air Filtration Unit |
 |
483 |
1 |
Komatsu 2,675 lbs., 36-Volt Sit-Down Electric Forklift, Model FB15MK-2, S/N 20939A with 106" H 2-Stage Lift and Side Shift, 9,855 Hours |
     |
489 |
1 |
***** BULK BID LOT #490 TO LOT #502 - FLOOR LEVEL CASE CONVEYOR SYSTEM - COMPLETE WITH (12) ABOVE GROIUND DRIVES, (3) PUSHERS, LANE STOPS AND TAKE-UPS WITH CHAIN ***** |
 |
490 |
1 |
2001 Dairy Conveyor 7.5 hp Above Ground Case Conveyor Drive - Complete with Sumitomo 87 Ratio Drive (#B) |
 |
491 |
1 |
2001 Dairy Conveyor 7.5 hp Above Ground Case Conveyor Drive - Complete with Sumitomo 87 Ratio Drive (#D) |
 |
492 |
1 |
2001 Dairy Conveyor 7.5 hp Above Ground Case Conveyor Drive - Complete with Sumitomo 87 Ratio Drive (#I) |
 |
493 |
1 |
2001 Dairy Conveyor 7.5 hp Above Ground Case Conveyor Drive - Complete with Sumitomo 87 Ratio Drive (#C) |
 |
494 |
1 |
2001 Dairy Conveyor 10 hp Above Ground Case Conveyor Drive - Complete with Sumitomo 87 Ratio Drive (#E) |
 |
495 |
1 |
Dairy Conveyor 5 hp Above Ground Case Conveyor Drive - Complete with Sumitomo 87 Ratio Drive (#F) |
 |
496 |
1 |
Dairy Conveyor 7.5 hp Above Ground Case Conveyor Drive - Complete with Sumitomo 87 Ratio Drive (#H) |
 |
497 |
1 |
Dairy Conveyor 5 hp Above Ground Case Conveyor Drive - Complete with Sumitomo 87 Ratio (#J) |
 |
498 |
1 |
Dairy Conveyor 7.5 hp Above Ground Case Conveyor Drive - Complete with Sumitomo 87 Ratio Drive (#G) |
 |
499 |
1 |
Dairy Conveyor 7.5 hp Above Ground Case Conveyor Drive - Complete with Sumitomo 87 Ratio Drive (K) |
 |
500 |
1 |
Dairy Conveyor 10 hp Above Ground Dual Case Conveyor Drive (A2) |
 |
501 |
1 |
Approximately 1 hp Above Ground Case Conveyor Drive (M) |
    |
502 |
1 |
Remaining Ground Level Case Conveyor System Components including 100's of Feet Chain, (3) Edemeyer Case Pushers, Lane Stops and Take-Ups (Mostly Installed in 2001) |
 |
504 |
1 |
Cannon Hydraulic Case Stacker, Model ST83, S/N 1696 with Stainless Frame |
 |
505 |
1 |
Cannon Hydraulic Case Stacker, Model ST83, S/N 1818 with Allen Bradley PLC |
 |
506 |
1 |
PAK-TEK S/S Hydraulic Caser Model PTC-E2, Single Head, Caser for 5 x 5 NEP Paper Cartons (Combo for N5/120) and Allen Bradley SLC 504 PLC Controller |
 |
507 |
1 |
Cannon All S/S Pneumatic Caser, Model CC810-MT, S/N 336, Qt., Half Pint Caser, Single or Dual Infeed and Allen Bradley SLC 5/01 PLC |
    |
508 |
1 |
Osgood 4-Wide Culture Products Cup Filler, Model 4600, S/N 29651 - Complete with Allen Bradley SLC 5/05 PLC Controller, Tamper Evident System and Lid Inserter (Set-Up to do 1-1/2 lb. Containers 4-1/4" W) (Asset 13958A) |
   |
509 |
1 |
Osgood 4-Wide Culture Products Cup Filler, Model 4625 -Complete with Allen Bradley Micrologix 1500 PLC Controller, Tamper Evident System and Lid Inserter, (Set-Up to do 8 oz. and 16 oz. Containers 3-1/2" W) (Asset #13900) |
   |
510 |
1 |
Osgood 16-Station Rotary Cup Filler, Model 2001-R, S/N 259 Set-Up with 4-1/4" Product Size, Tamper Evident Sealer, Lid Inserter, and Allen Bradley SLC 5/03 PLC Controller (Asset #ROBINSON 326-50229) |
     |
511 |
1 |
Zitropack Single Lane Cultured Products Filler, Model Z1000, S/N IL-Z2034, Operated on 3 to 5 lbs. with 5-1/2" W Cup Size, Allen Bradley C/504 PLC Controller, Tamper Evident System, Cup Magazine, Lid Inserter (Assest #13871) |
|
|
512 |
1 |
Sabel All S/S Case Packer, Model SE, S/N 689 with Allen Bradley SLC 5/01 PLC Controls, Packages (12) 8 oz. Sour Cream |
|
|
513 |
1 |
Sabel All S/S Automatic Case Packer, Model SE, S/N 856 - Complete with Bemis Mounted Tape Sealer, Model 1018SS and Allen Bradley 5/25 PLC Controls |
 |
514 |
1 |
Evergreen H5 2-Lane Carton Filler, S/N 3151 - Complete with Portola Fitment Kit and Diversified Cap Hopper, Model 111-200 |
|
|
519 |
1 |
Crepaco Dome-Top Jacketed Mixing Tank, S/N B-0832 (40" W x 36" H) with Whip Type Agitator and Sprayball |
 |
520 |
1 |
44" L x 20" W x 16" Deep Portable S/S Tank (Asset #13969) |
 |
521 |
1 |
3-Compartment S/S Insulated Flavor Tank with 27" W x 38" W x 21" Deep Compartments with Agitator, Blades (Note: No Agitator Motor or Drives Included) (Asset #???87) |
 |
522 |
1 |
43" H x 38" W Hinged Lid S/S Tank (Asset #07238) |
 |
523 |
1 |
TSI 170 Gal. S/S Tank, S/N 2788-00 |
 |
524 |
1 |
34" W x 48" H S/S Hinged Lid Tank (Asset #07252) |
 |
525 |
1 |
34" W x 48" H S/S Hinged Lid Tank (Asset #07251) |
 |
526 |
3 |
Eco Water 66" H x 24" W Softener Vessels, S/N 22150, 22149 and 22148 with Salt Tank (Asset #06189 and #06191) |
|
|
527 |
1 |
Walker 50,000 Gal. Jacketed S/S Silo with Aluminum Clad Exterior |
 |
528 |
1 |
6 ft. H x 36" S/S Tank |
 |
529 |
1 |
6 ft. H x 36" S/S Tank |
 |
530 |
1 |
6 ft. H x 36" W S/S Tank (Asset #13635) |
|
|
531 |
1 |
Cherry Burrell 48" W x 42" H Dome-Top S/S Mix Tank, Model 300-SSP, S/N 60-165 - Complete with Bottom Sweep Agitator, Baffle and Sprayball |
|
|
532 |
1 |
Cherry Burrell 3,000 Gal. S/S Horizontal Jacketed Aseptic Tank, S/N E-044-95, Board #4344, MWP 60 psi at 350 Degree, All S/S Exterior, Pressurize Bolted Lid (Approximate Dimensions - 92" W x 11 ft. L) |
|
|
533 |
1 |
APV/Crepaco / Stainless Fabrication Inc. 8,000 Gal. Horizontal S/S Jacketed Aseptic Tank, S/N 2151 / 2495, MAWP 60 psi at 350 Degree, Bolted Pressurized Lid (Approximately 104" W x 22" L Dimensions) |
|
|
533A |
1 |
DCI 2,000 Gal. Dome-Top Dish Bottom S/S Processor, Model/SN 79-F-24715-2 with Lightnin High Shear Agitator, Model 7123 with Baffle, Dual Sprayball and Air Valve (NOTE: Used for Pudding Production) |
|
|
533B |
1 |
DCI 2,000 Gal. Dome-Top Dish Bottom S/S Processor, Model/SN 79-F-24715-4 with Lightnin High Shear Agitator, Model 7123 with Baffle, Dual Sprayball and Air Valve (NOTE: Used for Pudding Production) |
|
|
534 |
1 |
Cherry Burrell 600 Gal. Dome-Top, Cone-Bottom S/S Processor, Model MEPDCA, S/N 600 - 78-2293 with Bottom and Side Scrape Surface Agitation, Baffle, 3 hp, 1170 RPM Motor with 70 Ratio Drive (Used for Sour Cream) (Asset #MG 0061) |
 |
535 |
1 |
5 ft. H x 69" W Dome-Top S/S Jacketed UHT Surge Tank with Bolted Lid |
 |
536 |
1 |
Crepaco Approximately 52" H x 40" W Dome-Top Jacketed S/S Tank, S/N 11083, Board #2251 - Complete with Dimple Exterior Jacket, 60 psi at 300 Degree F with Bolted Type Lid (Asset #MG 412) |
|
|
537 |
1 |
Crepaco 300 Gal. Dome-Top S/S Processor, S/N D-3295 with Anderson AJ300 Chart Recorder, Stainless Bottom, Temperature Sensor, Plug Valve, Bottom Sweep Agitator and Baffle (Processor Dimensions 50" W x 40" Deep), 75 psi @ 350 Degree F |
|
|
538 |
1 |
DCI 300 Gal. Dome-Top S/S Processor, S/N 95D51506 with Anderson AJ 300 Chart Recorder, Anderson Pressure Sensor, Stainless Bottom, Bottom Sweep Agitator, Baffle and Plug Valve, Jacket MAWP 115/-15 psi at 347 Degree F (NOTE: Motor and Drive Missing) (Processor Dimensions 50" x 40") |
|
|
539 |
1 |
APV/Crepaco 200 Gal. Dome-Top, Cone-Bottom S/S Blending Tank, S/N C-9466 with Whip Style Agitator, Sprayball and Tri-Clover Air Valve |
 |
540 |
1 |
Creamery Package 49" W x 40" Deep Hinged Lid Insulated S/S Tank, S/N 7129 with Sprayball (NOTE: Missing Agitator, Drive and Shaft) |
|
|
541 |
1 |
Approximately 52" W x 40" Deep Dome-Top S/S Tank (NOTE: Missing Agitator, Drive and Shaft) |
|
|
542 |
1 |
Approximately 48" W x 36" Deep Cone-Bottom Hinged Lid S/S Tank (NOTE: Missing Agitator, Drive and Shaft) |
|
|
543 |
1 |
Approximately 48" W x 36" Deep Cone-Bottom Hinged Lid S/S Tank (NOTE: Missing Agitator, Drive and Shaft) |
|
|
544 |
1 |
Mojonnier Approximately 52" W x 39" Deep Dome-Top Jacketed S/S Tank (NOTE: Missing Agitator, Drive and Shaft) (Asset #MG 1133) |
|
|
545 |
1 |
Mojonnier Approximately 52" W x 39" Deep Dome-Top Jacketed S/S Tank with Bottom Sweep Agitator, Motor, Drive and Baffle (Asset #MG 1134) |
|
|
546 |
1 |
Crepaco 300 Gal. Dome-Top, Cone-Bottom S/S Processor, S/N 300-9923 with Bottom Sweep Agitator, Baffle and Sprayball (NOTE: Missing Agitator, Drive, Motor and Door) |
|
|
547 |
1 |
Approximately 50" x 55" x 39" Deep S/S Flavor Tank with Agitator |
|
|
548 |
1 |
Approximately 47" W x 42" Deep Dome-Top S/S Tank with Bottom Sweep Agitator and Baffle |
 |
550 |
1 |
(2) Pc. - BAC Cooling Tower, Model VC1-90, S/N USA00 3150101 (Asset #07291 and #07290) |
 |
551 |
1 |
Rite Hite 7 ft. W x 5 ft. L Adjustable Hydraulic Dock Leveler, Model RH1067, S/N M8500617 with Hydraulic Pump and Brackets (Asset #07273 and 07227) |
 |
552 |
1 |
Rite Hite 7 ft. L x 6 ft. W Hydraulic Dock Leveler, Model 3086QC, S/N HI922198 |
 |
553 |
1 |
Rite Hite 7 ft. L x 78" W Hydraulic Dock Leveler, Model 2086, S/N HI932 |
 |
554 |
1 |
Vestil 5 ft. W x 36" L Dock Plate |
 |
555 |
1 |
Sims Carton Erecting/Case Sealer, S/N CE009 (Asset #07971) |
|
|
556 |
1 |
Cannon Hydraulic Palletizer System, Model 9PMR86, S/N 229 with Allen Bradley SLC 5/01 PLC includes Pallet Loading Section and Dairy Conveyor All S/S Hydraulic Pallet Dispenser (Used on (4) 1-Gal. Plastic Cases) |
 |
558 |
1 |
Von Gal Low Level Palletizer, Model LOPALM1211, S/N 3368 |
 |
559 |
1 |
Orion Pallet Wrapper, Model H55-9, S/N 4044253 (Asset #07207) |
 |
560 |
1 |
Signode Pallet Strapper |
 |
561 |
1 |
Federal 18-Valve Rotary Filler, Model 1857GWSS4/ 185F1121, Set-Up for Square Gal. with 5-Head Capper (NOTE: Missing Some Parts) |
 |
562 |
1 |
Franz 20-Valve Gal. and Half Gal. Rotary Jug Filler, Model 20GR, S/N 20-05-0499 (NOTE: Missing Some Parts) |
|
|
562A |
1 |
Federal 32-Valve Rotary Filler, Set-up with Square Half Gal. (Note: Missing Parts) |
|
|
563 |
1 |
Moen Boxformer, Type Bliss Master, Model PF106BIFQ, S/N 1222 with Case Sealer and Allen Bradley Controls |
|
|
564 |
1 |
Moen Boxformer, Model PF106-BIFQ, S/N 122-1057 with Case Sealer |
 |
583 |
1 |
New Waukesha/Cherry Burrell Votator/CR Mixer, Model 929050, S/N 98025MA - Complete with 30 hp Motor, Shell MAWP -275 psi at 300 Degree, Mounted on S/S Frame (Asset #07946) |
 |
584 |
1 |
New Waukesha/Cherry Burrell Votator/CR Mixer, Model 929050, S/N 98025MA - Complete with 30 hp Motor, Shell MAWP -275 psi at 300 Degree, Mounted on S/S Frame (Asset #07947) |
|
|
585 |
1 |
Westfalia Type MSA120 - 47-076 CIP Separator, S/N 1657979 - Complete with Valves and Separator Tools (NOTE: No Controls) |
|
|
585A |
1 |
New Spare Westfalia Type MSA120 Separator Clutch |
|
|
585B |
1 |
Spare Westfalia MSA-120 Separator Parts including: Main Shaft, Various Brass Gears and Gaskets |
 |
585C |
1 |
Westfalia MSA-120 Spare Motor |
 |
586 |
1 |
Approximately 17" H x 23" W S/S Hinged Lid Cream Tank with Tri-Clover 2 hp Centrifugal Pump with Valves |
|
|
587 |
1 |
Westfalia Type MSA120-47-076 CIP Separator, S/N 1657978 - Complete with Cream Tank and Service Tooling (NOTE: No Controls) (Asset #07286 and #07285) |
|
|
587A |
1 |
Westfalia MSA120 Approximately 16" H x 22" W Spare Cream Tank (Asset #07281) |
|
|
588 |
1 |
Westfalia Type MSA-120-47-076 CIP Separator, S/N 1657977 with Controls (NOTE: Missing Motor) |
|
|
589 |
1 |
Westfalia SAMM20006 CIP Separator, Bowl S/N 1638306 includes Cream Tank and Some Service Tooling (NOTE: Does Not Include Motor or Controls) (Asset #07267, #07268, #07276 and #07278) |
|
|
590 |
1 |
Westfalia SAMM12006 CIP Separator, S/N 1648776 includes Some Parts (NOTE: Missing Motor and Controls (Asset #07264, #07277 and #07270) |
 |
591 |
1 |
Tetro Pak Homogenizer, Type ALH25, S/N 500321, Operated at 1,900 GPH, Working Pressure 160 Bar (Asset #07293) |
 |
592 |
1 |
Gaulin MS45 Homogenizer, Type 5000 - 2500 MS452.5TPS, S/N 28610015, 2500 psi |
 |
593 |
1 |
Gaulin MC45 Homogenizer, Type 5000 MC45.2TPS, S/N 2828878 |
 |
594 |
1 |
Gaulin MC18 Homogenizer, Type 2250MC 182TPS, S/N 9808389 |
 |
595 |
1 |
Crepaco Model 5DD Homogenizer, S/N 5DD425-3231 (Asset #07948) |
 |
596 |
1 |
Cherry Burrell Super Homo Homogenizer, Series SS7500-TGR, S/N 281330, Capacity 5814 GPH, 120/60 hp, 1900 psi (Asset #MG 1057) |
 |
597 |
1 |
Cherry Burrell Super Homo Homogenizer, Model SS7500 (NOTE: Missing Some Parts) |
|
|
597A |
1 |
(2) Pallets Assorted Cherry Burrell Type SS7500 Homogenizer Spare Parts including: Cranks, Gears, Cover Assemblies, Gaskets, V-Belts |
 |
598 |
1 |
Gaulin R & D Homogenizer, Model 125CGD, S/N 625452331 (Asset #FDI 1299) |
 |
599 |
1 |
Gaulin R & D Homogenizer, Type 15-15MR-8TBA, S/N 68810795 |
 |
600 |
1 |
New U.S. Motors Spare 60 hp Homogenizer Motor, 1785 RPM, 230/460 V |
|
|
601 |
1 |
B & H Labeler, Model BH2000RCO, S/N 212309 9710141, Set-Up for 48 oz. Bottles with Blower, 17 ft. L Product Conveyor with 4-1/2" W Plastic Chain and Allen Bradley 1336 VFD |
|
|
602 |
1 |
Zitropack Dual Lane Cultured Products Cup Filler, Model ZR2000, S/N R-Z2044 - Complete with 2-Head Filler at 16 Station, Tamper Evident System with Pull Tab, Lid Inserter, Allen Bradley SLC 5/05 PLC Controller and Emerson Controls, 4-1/4" Cup Size 80 cpm for 314 and 409 Dia., 30 cpm for 3 lb.; 8/16/24 and 36 oz.; 409 Dia; 314 Dia. |
|
|
603 |
1 |
47" All S/S Round Accumulation Table - Complete with 2-Sections S/S Product Conveyor, 3-1/4" W with Drives (Used with Zitropack ZR2000 Cup Filler) |
 |
604 |
1 |
Osgood 16-Station Rotary Cup Filler, Model 2001-16, S/N 29238 with 4-3/4" Cup Size, 2-Piston Filler, Tamper Evident Sealer and Allen Bradley SLC 501 PLC Controls (NOTE: Missing Some Parts) |
 |
605 |
1 |
2002 Dalmec Vacuum Type Box Handling System, Type PFC, S/N 0223632, 50 lb. Max. Capacity with Retracting Arm and 102" H Pedestal with Controls |
 |
606 |
1 |
Omega 60" Bottle Descrambler/Orienter, Model OSS-72 Omega Short, S/N 97-J22229, Set-Up for 48 oz. and 32 oz. at 90 CPM with Allen Bradley Micrologix 1000 PLC Controller |
 |
607 |
1 |
2003 Cannon Pneumatic All S/S Caser, Model 120 - 1096566, S/N 120-1498 - Capable of Doing Qt., 1/2 Pint or SCS Caser, Single or Dual Infeed, Multi-Tier 1-Head Cases or Corrugated Boxes and Allen Bradley Micrologix 1200 PLC Controller (Asset #07203) |
 |
609 |
1 |
2001 Cannon Qt./Half Pint/SCS All S/S Pneumatic Caser, Model 120-107-1241, S/N 120-1436, Single or Dual Infeed, Multi-Tier 1 or 2 Head, Works on Cases or Corrugated Boxes with Allen Bradley SLC 501 PLC Controller (Operated with NEP #2 Filler) |
 |
610 |
1 |
2003 Cannon Gal./Half Gal. All S/S Pneumatic Caser, Model 110-1081705, S/N 110-14-69 - Complete with Single or Dual Infeed, Single Tier 1-Head Caser or Corrugated Boxes with Allen Bradley Micrologix 1200 PLC Controller (Operated with H100 Filler) |
 |
611 |
1 |
Cannon QT./Half Gal./Half Pint All S/S Hydraulic Caser, Model CC810MT-P, S/N 1259 - Complete with Allen Bradley SLC 150 PLC Controller (Operated with NEP #1 Filler) |
 |
612 |
1 |
Cannon S/S Hydraulic Caser, Model CG810MT with Allen Bradley SLC 150 PLC Controls (Operated with Federal Filler) |
 |
613 |
1 |
Cannon S/S Hydraulic Caser, Model CC810MT-P, S/N 1154, Single Head with Allen Bradley SLC 150 PLC Controller (Operated with Q7 Filler) |
 |
614 |
1 |
Cannon All S/S Hydraulic Case Stacker with Allen Bradley SLC 5/01 PLC Controller |
 |
620 |
1 |
Vickers 7.5 hp Hydraulic Pump with Reservoir |
 |
621 |
1 |
Young 15 hp Hydraulic Pump with Reservoir |
 |
622 |
1 |
PD/N Hydraulic Pump System, Model 5629-1, S/N 65380 with Vickers Dual 20 hp Hydraulic Pumps |
 |
623 |
1 |
ETN 20 hp Hydraulic Pump with Reservoir |
 |
624 |
1 |
GHI 7.5 hp Hydraulic Pump with Reservoir (Asset #07230) |
 |
625 |
1 |
Thermal Transfer Hydraulic Cooling System with 1 hp Hydraulic Pump, Model AO-20 (Asset #13919) |
 |
626 |
1 |
15 hp Hydraulic Pump System with Reservoir and Bosch Pump |
 |
627 |
1 |
Racine 15 hp Hydraulic Pump System with Reservoir |
|
|
631 |
1 |
APV R51 Press - Complete with (2) Dividers, Approximately (200) Late Model AGC Pro 5 Plates |
|
|
632 |
1 |
APV CR30 S/S Plate Press, S/N 19754 - Complete with (4) Dividers, Hydraulic Close and Plates |
|
|
633 |
1 |
APV R51 S/S Plate Press, S/N 3875 with Plates |
|
|
634 |
1 |
AGC Pro-Flow Series S/S Plate Press, Model R5 with Plates |
 |
635 |
1 |
APV 24" S/S Plate Press, Model SR, S/N 20492 with (82) Plates |
 |
636 |
1 |
Alfa Laval 33" Plate Press with (18) Plates, Model M6-MFG, S/N 30105 - 59411 |
 |
637 |
1 |
Bell & Gossett 48" L x 10" W Shell and Tube Heat Exchanger with Pump, Trap and Valves Mounted on S/S Rack |
 |
638 |
1 |
Bell and Gossett 48" L x 9" W Shell and Tube Heat Exchanger, Board #37141, S/N 93Y77 250-09-1 with Pump, Trap and Valves, Mounted on S/S Rack |
 |
639 |
1 |
Bell and Gossett 24" L x 6-1/2" W Shell and Tube Heat Exchanger, S/N 90T79846-01 with Pump and Valves, Mounted on S/S Stand (Asset #07296) |
 |
640 |
1 |
Statco 30" L x 8" W Heat Exchanger, Model 824UC-2, S/N 219027 with Pump and Valves, Mounted on S/S Rack (Asset #07280 or #13719) |
 |
641 |
1 |
50" x 45" x 15" Deep Square S/S Balance Tank |
 |
642 |
1 |
37" W x 32" W x 18" Deep Square S/S Balance Tank (Asset #07226) |
 |
643 |
1 |
32" W x 13" Deep Round S/S Balance Tank with Lid |
 |
644 |
1 |
32" W x 12" Deep Round S/S Balance Tank with Lid |
 |
645 |
1 |
24" W x 17" Deep S/S Balance Tank with Lid |
 |
648 |
1 |
2004 Comp Air 150 hp Screw Air Compressor, Type L132-9W, Reference #349020/0686, 460 V |
 |
649 |
1 |
Sullair 100 hp Screw Air Compressor, Model 20-100H ACAC, S/N 003-66123, 115/125 psi |
 |
650 |
1 |
Ingersoll Rand 100 hp Screw Air Compressor, Model EP100 (Asset #06094) |
 |
651 |
1 |
Quincy 125 hp Q490 Screw Air Compressor, Model FSS255112, S/N A38630N |
 |
652 |
1 |
Quincy 250 hp Q1000 Screw Air Compressor, S/N QS1100 0WNW3 - 234442 |
 |
653 |
1 |
Quincy 200 hp Q740 Screw Air Compressor, Model FSS255170, S/N A40365N |
 |
655 |
1 |
1992 Kaeser 75 hp Screw Air Compressor, Model CS90, S/N 753190, 47,084 Load Hours, 78,874 Service Hours |
 |
656 |
1 |
Sullair 40 hp Screw Air Compressor, Model 10B-40, S/N 007309, 115/125 psi with USPI Filtration System (Asset #07189) |
 |
657 |
1 |
Pure-Aire Refrigerated Air Dryer, Model PCF100, S/N 4670 (Asset #07190) |
 |
658 |
1 |
Zeks Refrigerated Air Dryer, Model NC Series (Asset #07193) |
 |
659 |
1 |
Gardner Denver Refrigerated Air Dryer, Model RDS125A - 1, S/N 126-10 - 21-1998 - 4274 |
 |
660 |
1 |
USPI Portable Oil Filtration System with Pump (Asset #07241) |
 |
661 |
1 |
Palatek 30 hp Screw Air Compressor, Model 30D7, S/N 98K015 |
 |
662 |
1 |
Deltech Pyramid 2000 Refrigerated Air Dryer, Model P550WE4, S/N 98EPA2259 (Robinson Asset #326-50041) |
 |
663 |
1 |
Pure-Aire Air Filter Rack, Model PCR12, S/N 11489 with Dual Filters (Asset #MG OR-94017) |
 |
664 |
1 |
Twistair 30 hp Screw Air Compressor, Model TA030B2-5, S/N 103416, 125 psi, Mounted on Horizontal Tank with USPI Filtration System (Asset #07191) |
 |
665 |
1 |
Sullair 25 hp Screw Air Compressor, Model 10-25H, S/N 19744FGE, 125 psi |
 |
668 |
1 |
Assorted Pallet Racking Components with (1) Upright, (4) Crossbeams and (4) Cage Racks |
 |
672 |
1 |
Westinghouse/Rocky Mountain 75 KVA Transformer Bank, S/N 88D17 630203, Single Phase, HV 7620/ 13200Y and LV 120/208Y (NOTE: No PCB's) |
 |
673 |
1 |
Westinghouse/Rocky Mountain 75 KVA Transformer Bank, S/N 88D17 630103, Single Phase, HV 7620/ 13200Y and LV 120/208Y (NOTE: No PCB's) |
 |
674 |
1 |
Westinghouse/Rocky Mountain 75 KVA Transformer Bank, S/N 88D17 630303, Single Phase, HV 7620/ 13200Y and LV 120/208Y (NOTE: No PCB's) |
 |
675 |
1 |
Mars 8 ft. L Power Air Curtain, Model 96-3-0, 115 V, Single Phase |
 |
676 |
6 |
Rolls New Max 3498 Case Conveyor Chain |
 |
677 |
1 |
New Sumitomo Sm-Cyclo 97 Ratio Case Conveyor Drive, Model CHHS - 6195Y - 87 |
 |
678 |
1 |
New Sumitomo Sm-Cyclo 87 Ratio Case Conveyor Drive, Model CHHS - 6175Y - 87, S/N VAD100991 |
 |
679 |
1 |
New Sumitomo Sm-Cyclo 87 Ratio Case Conveyor Drive, Model CHHS - 6185Y - 87, S/N VAD100987 |
 |
680 |
1 |
Steel Barrel Pallet Containment |
 |
685 |
1 |
Wesco Portable Lifting Cart |
|
|
685A |
1 |
Wesco Portable Lifting Cart |
 |
686 |
1 |
Miller Thunderbolt XL 225/100 Amp Welder |
 |
687 |
1 |
Thermal Dynamics Plasma Cutting System, Model PAKXT |
 |
688 |
1 |
Assortment Pneumatic Air Cylinders |
 |
689 |
1 |
(3) Shelves Assorted Motors and Drives |
 |
690 |
1 |
Assorted S/S and Other Bar Stock |
 |
691 |
1 |
Dake Hydraulic Press |
 |
692 |
1 |
Grizzly Mini-Milling Machine, Model G86891 with Mini 16" Variable Speed Lathe, Model G8688 with Accessories, Mounted on Cabinet |
 |
693 |
1 |
Large Assortment Motors and Drives on 2-Sections of Shelving |
 |
694 |
1 |
Tri-Clover Centrifugal Pump with Spare Body |
 |
695 |
1 |
Assorted Tri-Clover and Other Centrifugal and Positive Pump Parts |
 |
696 |
1 |
Assorted New and Used Hydraulic Pump Heads with Parts including Brass Flow Meters |
 |
697 |
1 |
Contents of 5-Sections of Shelving including S/S and Other Plumbing Fittings, Variable Speed Controllers, Wheels with Casters, Filters, Etc. |
|
|
698 |
1 |
Contents of 6-Sections of Shelving including: Stainless, Brass and Other Pluming Supplies with Brass Ball Valves, Unions, Reducers, T's, Condulet, Fittings, Electrical Boxes |
 |
699 |
1 |
26-Sections Assorted Shelving |
 |
705 |
1 |
4-Sections 4-Shelf Approximately 8 ft x 4 ft. Racking |
 |
706 |
1 |
3-Sections 4-Shelf Approximately 8 ft. x 3 ft. Racking |
|
|
720 |
1 |
Designated Contents of Upstairs Spare Parts including: Drive Parts, Sprockets, Pullies, Couplers, Case Conveyor Parts, Hydraulic Hose, Chain, Electrical including Boxes (NOTE: Designated Light Fixtures and Bulbs Not For Sale) |
 |
750 |
1 |
Contents of Room including: Large Assortment of Copper, Galvanized and Other Piping, Assorted S/S and Other Stock including: Angle and Flat, Case Conveyor, Ware Strips, Conveyor Parts with Shelving |
 |
756 |
1 |
Cleaver Brooks 150 hp Boiler, Model CB293-150, S/N L-19092, Natural Gas and #2 Fuel Oil, 150 psi, 6,275,000 BTU/Hr. |
 |
760 |
1 |
New Jug Conveyor Aluminum Turn with Cable and Brackets |
 |
761 |
1 |
Assorted Jug Conveyor Sections including: Straight Section, Bends, Pans |
 |
762 |
1 |
S/S Jug Conveyor Stand |
 |
763 |
1 |
Assorted 1-1/2" to 4" S/S Piping - Some New |
 |
764 |
1 |
Assortment Steel and Galvanized Piping with Rack |
 |
765 |
1 |
S/S Holding Tube Rack |
|
|
766 |
1 |
Large Assortment Case Conveyor including: Some S/S Pan Sections with Turns, Straight Sections, Chain, Diverter Section |
 |
767 |
1 |
Cannon 8 ft. H S/S Case Inverter |
 |
768 |
1 |
Cannon 8 ft. H S/S Case Inverter |
 |
769 |
1 |
Cannon 8 ft. H S/S Case Inverter |
 |
770 |
1 |
Cannon 8 ft. H S/S Case Inverter |
 |
771 |
1 |
8 ft. H S/S Case Inverter |
 |
772 |
1 |
Dairy Conveyor 8 ft. H S/S Case Inverter |
 |
773 |
1 |
8 ft. L Dual Lane S/S Product Conveyor Section - 4-1/2" W Belt with Drive |
 |
774 |
1 |
Descon 64" L S/S Product Conveyor Turn, 15" W |
 |
775 |
1 |
Large Assortment Mostly 3-1/4" W S/S Product Conveyor Section including: Straight Sections, Turns, Leg Supports, Drives with Chain |
 |
776 |
1 |
Large Assortment 1-1/2" to 3" S/S Piping and Connectors |
 |
777 |
1 |
20 ft. L Galvanized Power Belt Conveyor Section, 12" W Belt with Drive |
 |
780 |
1 |
Clark, 2,600 lb. 36-Volt Sit-Down Electric Forklift, Model TM156, S/N TM247 - 0613 - 9091FB - 195 with 3-Stage Lift and Side Shift |
 |
781 |
1 |
Clark 3,750 lb. 36-Volt Sit-Down Electric Forklift, Model TM20, S/N TM247-0369 - 7867FB-690 with 3-Stage Lift and Side Shift |
|
|
811 |
1 |
Perma San 3-Tank Raw CIP System - Complete with 5 ft. H x 48" W Tanks, Ampco Centrifugal Pump, 2006 Scherping 10 ft. L S/S Shell and Tube Heat Exchanger, Tri-Clover Air Valves with Related Piping, Direct Logistics 205 PLC Controller and (1) Shur Graph Controller and Anderson AJ300 Chart Recorder |
 |
812 |
1 |
Skid-Mounted CIP System - Complete with 24" H x 30" W S/S Tank with Tri-Clover Approximately 10 hp Centrifugal Pump, 5 ft. L S/S Shell and Tube Heat Exchanger, Allen Bradley SLC 500 PLC Controller with Panelview 550 Read-Out |
 |
813 |
1 |
Ampco 15 hp Centrifugal Pump with 3" x 2-1/2" Clamp Type S/S Head and 3500 RPM Motor |
 |
814 |
1 |
Tri-Clover 5 hp Centrifugal Pump with 2" x 1-1/2" Clamp Type S/S Head and 1750 RPM Motor |
 |
818 |
1 |
Bulk Chemical Storage System - Complete with 3,000 Gal. and Approximately 1,000 Gal. Chemical Storage Tanks with Containments, Diaphragm Chemical Feed Pumps with Bradley Emergency Eyewash/Shower Station |
 |
825 |
1 |
Waukesha Size 130 Positive Displacement Pump, S/N 143743 - Completed with 2-1/2" Threaded Type S/S Head, 7.5 hp with Drive, Mounted on S/S Frame |
 |
826 |
1 |
Waukesha Size 130 Positive Displacement Pump, S/N 21794198 with 2-1/2" Threaded Type S/S Head, 7.5 hp Motor with Drive, Mounted on S/S Frame |
 |
827 |
1 |
Waukesha Size 130 Positive Displacement Pump Head, S/N 16037SS with 2-1/2" Threaded Type S/S Head |
 |
828 |
1 |
Waukesha Size 130 Positive Displacement Pump Spare Parts including: Shafts, Bearings, Gaskets, Seals |
|
|
830 |
1 |
Osgood 16-Station Rotary Cup Filler, Model 2001, S/N 29575 - Complete with 2-Head Filler, 3-1/2" Product Size, Allen Bradley SLC 5/04 PLC Controller with Panelview 600 Display |
|
|
831 |
1 |
Osgood 16-Station Rotary Cup Filler, Model 2001-10, S/N 29214 - Complete with 2-Head Filler, 4-3/4" Product Size, Allen Bradley SLC 500 PLC Controller |
 |
832 |
1 |
CMS Gilbreth Tamper Evident Wrapper, Type TAMP-R- ALERT11XU / 50422 |
 |
833 |
1 |
CMS Gilbreth Tamper Evident Wrapper, Type TRA-III-X - 50478 with Allen Bradley SLC 5/04 PLC Controller |
 |
834 |
1 |
3M-Matic Top and Bottom Case Sealer, Model 700R, S/N 10696 |
 |
835 |
1 |
SLS Roll-Tak Model 200 Labeler (#4) |
 |
836 |
1 |
SLS Roll-Tak Model 200 Labeler (#2) |
|
|
847 |
1 |
Over 300 ft. Gal. and Half Gal. Installed Aluminum Jug Conveyor System including: Alpine with Drives, Straight Sections, Bends, Inclines and Controls (Located Throughout Plant includes Conveyor Out Debagging Table Feeding Jug Filler) |
 |
848 |
4 |
S/S Plastic Roll Stands |
|
|
852 |
1 |
S/S Jug Handling Cart |
 |
853 |
1 |
S/S Jug Handling Cart |
 |
864 |
1 |
28" W x 20" Deep x 116" L S/S Wash Trough with Ampco Pump |
 |
865 |
1 |
74" L x 20" W x 16" Deep Jet Spray Wash Trough with Crepaco Centrifugal Pump (Asset #07275) |
 |
866 |
1 |
37" W x 36" Deep Hinged Lid Portable S/S Tank with Plug Valve |
 |
870 |
1 |
Cherry Burrell 2-Compartment at 250 Gal. Portable S/S Insulated Rectangular Tank, Model UAMS 250R, S/N 117 |
 |
871 |
1 |
Crepaco Portable Positive Displacement Pump with 3" Threaded S/S Head, SEW 7.5 hp Variable Speed Drive |
 |
872 |
1 |
Tri-Clover 5 hp Portable Centrifugal Pump with 2" x 1-1/2" Clamp Type S/S Head |
 |
873 |
1 |
Ampco Centrifugal Pump |
 |
878 |
1 |
2001 Phoenix Air Systems LLC Air Handling System, Model PH-180B95A, S/N 0310-105602-0 - Complete with Eclipse Air Heat Burner, Honeywell Controls, Allen Bradley Micrologix 1200 PLC Controller, 20,000 CFM, 230 V, 3 Phase (Heat and Positive Heat) (Dimensions Approximately 90" W x 92" H x 23 ft. L) (Located on Lower Roof) |
 |
879 |
1 |
2001 Phoenix Air Systems LLC Air Handling System, Model PH-120B95A, S/N 0310-105601-0 - Complete with Eclipse Air Heat Burner, Honeywell Controls, Allen Bradley Micrologix 1200 PLC Controller, 20,000 CFM, 230 V, 3 Phase (Heat and Positive Heat) (Dimensions Approximately 90" W x 92" H x 23 ft. L) (Located on Upper Roof) |
 |
883 |
1 |
Tri-Clover 15 hp Centrifugal Pump with 3" x 2-1/2" Clamp Type S/S Head and 3525 RPM Motor (Asset #07212) |
 |
884 |
1 |
Ampco 25 hp Centrifugal Pump, Model DCH2 with 3" x 3" Clamp Type S/S Head with 3520 RPM Motor |
 |
885 |
1 |
Crepaco 7.5 hp Centrifugal Pump with 3" x 2-1/2" Threaded S/S Head and 3455 RPM Motor (Asset #07143) |
 |
886 |
1 |
Tri-Clover 5 hp Centrifugal Pump with 3" x 2" Clamp Type S/S Head and 3450 RPM Motor Mounted on Frame with 18" H x 18" S/S Tank (Asset #06809) |
 |
887 |
1 |
Waukesha Size 130 Positive Displacement Pump, S/N 05L3254 with 3" Clamp Type S/S Head with Hydraulic Drive, Mounted on S/S Frame (Asset #07223) |
 |
888 |
1 |
Tri-Clover Positive Displacement Pump, Model PR60 - 2M-U84 - ST-S, S/N U2999 with Hydraulic Drive, Mounted on Portable S/S Frame (NOTE: Missing Cover Assembly and Rotor) |
 |
889 |
1 |
Waukesha Positive Displacement S/S Pump Head with Rotor (Asset #07209) |
 |
890 |
1 |
Tri-Clover Positive Displacement Pump Head with Assorted Motors |
 |
891 |
1 |
Sterling 15 hp Circulating Pump with 1725 RPM Motor and Flanged Head (Asset #07225) |
 |
892 |
1 |
Aurora 10 hp Pump, Model G6BF with Flanged Head (Asset #07224) |
 |
893 |
1 |
Copeland Freon Compressor, Model ERC2 - 020A - CAB-800 |
 |
894 |
1 |
Cotterman 5 ft. Aluminum Stairs |
 |
895 |
1 |
BT Hydraulic Jack with Mounted 4,500 lb. Digital Scale |
 |
896 |
1 |
Wesco Lifting Cart |
|
|
897 |
1 |
Large Assortment of S/S Tables, Racks, Dip Tanks with Contents including Scales, S/S Fittings including Caps, Nuts, Connectors, Clamps, Chemical Diaphragm Pumps, Barrel Containment, Chocks and Funnel |
 |
898 |
1 |
Contents of Wooden Rack including: Assortment of S/S Connectors, Flanges, Sprayballs, Cheese Vat Parts |
 |
899 |
2 |
S/S Ladders |
 |
900 |
1 |
S/S Cabinet with Rack |
 |
901 |
1 |
Gast 3 hp Vacuum Pump |
 |
902 |
1 |
Bishman Ez-Loader 4,500 lb. 42" Round Scissorlift Platform |
 |
903 |
1 |
Everco Portable Freon Recovery System, Model Evero A9950, S/N 0891A 0288 with Freon Tank |
 |
904 |
1 |
Advance Ride-On Floor Scrubber, Model HR/2800C |
 |
905 |
1 |
Portable Manlift Platform |
|
|
906 |
1 |
Control Panel with (11) Telemecanique Starters (Asset #07234) |
|
|
907 |
1 |
S/S Solenoid Control Panel with Regulators (Asset #07233) |
|
|
908 |
1 |
Square D Starter Control Panel with Size 3 Starter, Type 8536 SE01Y59, 460/575 V, 50 hp, 3 Phase with 100 Amp Breaker |
 |
909 |
1 |
34" H x 20" W S/S Tank with Bolted Lid |
 |
910 |
1 |
(2) Pc. Small S/S Sanitizer Tanks |
 |
911 |
1 |
S/S Flowverter Jumper Station with 2-1/2" Hook-Up |
 |
912 |
1 |
Harrington 2-Ton Electric Hoist with Power Trolley |
|
|
913 |
1 |
(4) Rolls Banding Material with New Resin Racks |
 |
914 |
1 |
Bonar 39" W x 40" W x 40" H 200 Gal. Resin Tote with Lid |
 |
915 |
1 |
Bonar 39" W x 40" W x 40" H 200 Gal. Resin Tote with Lid |
 |
916 |
1 |
Bonar 39" W x 40" W x 40" H 200 Gal. Resin Tote with Lid |
 |
917 |
1 |
Bonar 39" W x 40" W x 40" H 200 Gal. Resin Tote with Lid |
 |
918 |
2 |
Bonar 39" W x 40" W x 40" H 200 Gal. Resin Totes with Lids |
 |
919 |
2 |
Bonar 39" W x 40" W x 40" H 200 Gal. Resin Totes with Lids |
 |
920 |
2 |
Bonar 39" W x 40" W x 40" H 200 Gal. Resin Totes with Lids |
 |
921 |
2 |
Bonar 39" W x 40" W x 40" H 200 Gal. Resin Totes with Lids |
 |
922 |
2 |
Bonar 39" W x 40" W x 40" H 200 Gal. Resin Totes with Lids |
 |
923 |
5 |
Bonar 39" W x 40" W x 40" H 200 Gal. Resin Totes with Lids |
 |
924 |
5 |
Bonar 39" W x 40" W x 40" H 200 Gal. Resin Totes with Lids |
 |
925 |
5 |
Bonar 39" W x 40" W x 40" H 200 Gal. Resin Totes with Lids |
 |
926 |
5 |
Bonar 39" W x 40" W x 40" H 200 Gal. Resin Totes with Lids |
 |
927 |
5 |
Bonar 39" W x 40" W x 40" H 200 Gal. Resin Totes with Lids |
 |
928 |
5 |
Bonar 39" W x 40" W x 40" H 200 Gal. Resin Totes with Lids |
 |
929 |
5 |
Bonar 39" W x 40" W x 40" H 200 Gal. Resin Totes with Lids |
 |
930 |
5 |
Bonar 39" W x 40" W x 40" H 200 Gal. Resin Totes with Lids |
 |
931 |
5 |
Bonar 39" W x 40" W x 40" H 200 Gal. Resin Totes with Lids |
 |
932 |
5 |
Bonar 39" W x 40" W x 40" H 200 Gal. Resin Totes with Lids |
 |
933 |
5 |
Bonar 39" W x 40" W x 40" H 200 Gal. Resin Totes with Lids |
 |
936 |
1 |
Jug Leak Finder Controller (Asset #4026 or 5562) |
 |
937 |
1 |
(2) Pc. New Wall Corner Protectors |
 |
938 |
1 |
Accurate 3" Clamp Type S/S Milk Meter, Model RZ3A, S/N 9511056, Flow Rate 300 to 2,600 lbs. per min. with Veeder Root 7690 Read-Out |
 |
939 |
2 |
SEW Drives with Motors |
 |
940 |
1 |
Indexing Head |
 |
941 |
1 |
(7) Pc. New and Used Assorted Baldor and Reliance Motors with Dodge Drive (Asset #07219 and 07210) |
|
|
945 |
1 |
(4) Assorted S/S Stands |
 |
946 |
1 |
Assortment Tri-Clover, Fristam and Other Centrifugal Pump Parts including: Cover Assemblies, Impellers, Shafts, Etc. |
 |
947 |
1 |
Large Assortment Tri-Clover, APC, Waukesha and Other S/S Air Valve Parts including: Body Assemblies, Plungers, Covers, Etc. |
 |
948 |
1 |
Cherry Burrell Approximately 2 hp Centrifugal Pump, Model BA-F with 2" x 1-1/2" Clamp Type Head |
 |
949 |
1 |
Cherry Burrell Approximately 2 hp Centrifugal Pump, Model BA with 2" x 1-1/2" Clamp Type Head (Asset #07244) |
 |
950 |
1 |
Cherry Burrell Approximately 2 hp Centrifugal Pump, Model BA-H with 2" x 1-1/2" Clamp Type Head (Asset #07245) |
 |
951 |
1 |
Cage Rack |
 |
952 |
9 |
Valve Tri-Clover 3" S/S Air Valve Cluster |
 |
953 |
10 |
Valve Waukesha/Cherry Burrell 3" S/S Air Valve Cluster, Model WVALVE00278 (Asset #07295) |
 |
954 |
4 |
Valve Waukesha 3" S/S Air Valve Cluster (Asset #07274) |
 |
954A |
1 |
2" S/S Flowverter Housing with Assorted Tri-Clover Air Valve Bodies |
 |
955 |
2 |
Tri-Clover Centrifugal Pump S/S Body Enclosures - (1) with Motor, Model CS216 |
 |
956 |
1 |
Tri-Clover Model CS218 Centrifugal Pump, S/S Enclosure with Motor (NOTE: Missing Cover Assembly, Backplate and Impeller) |
 |
957 |
1 |
Tri-Clover 3 hp Centrifugal Pump, Model C216 with 2" x 1-1/2" Clamp Type S/S Head |
 |
958 |
1 |
Tri-Clover 5 hp Centrifugal Pump, Model C218 with 3" x 1-1/2" Clamp Type S/S Head and 1730 RPM Motor (NOTE: Missing Backplate and Impeller) |
 |
959 |
1 |
Tri-Clover 5 hp Centrifugal Pump, Model C218 with 3" x 1-1/2" Clamp Type S/S Head |
 |
960 |
1 |
(3) Leeson, Baldor and Reliance 20 hp, 25 hp and 15 hp Motors |
 |
961 |
1 |
Assorted Sullair Air Compressor Filters and Gaskets |
 |
962 |
1 |
(2) Anderson Chart Recorders |
 |
963 |
1 |
(2) Orion Model 230A Hand-Held Digital pH Meters with Luminescent Colony Counter (Asset #07256) |
 |
964 |
1 |
Assorted LMI, Graco Chemical Feed Pumps with Mixing Stations (Asset #07258 and #07257) |
 |
965 |
1 |
(5) Diversey and Beta Chemical Feed Pumps |
 |
966 |
1 |
Assorted Diessel and Accurate Flow Meter Parts including Bodies and Controller (Asset #07248, #07249, #07247 and #07250) |
 |
967 |
1 |
S/S Enclosure |
 |
968 |
1 |
Assorted Square D and Other Breaker Panels and Safety Switches including Allen Bradley and Square D Starters |
 |
969 |
1 |
(2) ABB ACS200 and 500 Variable Speed Controllers |
 |
970 |
3 |
Reliance Variable Speed Controllers |
 |
971 |
1 |
Allen Bradley 1336 Plus II Variable Speed Controller |
 |
972 |
1 |
54" L x 19" W x 22" Deep S/S Wash Trough with Pump and Assorted Separator Tools (Used for Tear Down Separator) |
 |
973 |
1 |
Large Assorted S/S Clamps in (2) Crates |
 |
974 |
1 |
S/S Likwifier Impeller |
 |
975 |
1 |
Assorted 1-1/2" to 3" Line Wrenches |
 |
976 |
1 |
(2) LCI Sugar Meters with (2) Neptune Bodies |
 |
977 |
1 |
Tri-Clover 2-1/2" S/S Flow Diversion Valve |
 |
978 |
1 |
(6) Pc. - (5) 2" Butterfly Valves with Sampling Valve |
 |
979 |
1 |
Tri-Clover 3" 3-Way Clamp Type and Threaded S/S Air Valve |
 |
980 |
1 |
SPI 2" 2-Way Clamp Type S/S Air Valve |
 |
981 |
3 |
Waukesha 1-1/2" and 2" 2-Way Clamp Type S/S Air Valve |
 |
982 |
3 |
Waukesha and APC 3" S/S Air Valves |
 |
983 |
3 |
2" Online S/S Filters |
 |
984 |
1 |
S/S Bulk Filler Head |
 |
985 |
1 |
Mettler Toledo Digital S/S Scale (Asset #07254) |
 |
986 |
1 |
Mettler Toledo Digital S/S Scale (Asset #07260) |
 |
987 |
1 |
Mettler Toledo Digital S/S Scale (Asset #07255) |
 |
989 |
1 |
Fend-All Emergency Station |
 |
994 |
1 |
Exide Like New 36 V Forklift Charger, Model D3E2 - 18-850, S/N Ch104147 |
 |
995 |
1 |
GNB 24 V Forklift Charger, Model SCRFLX - 12-475TIZ, S/N 02G0383S |
 |
996 |
1 |
GNB 24 V Forklift Charger, Model SCRFLX - 12-600SIZ, S/N 0200211S (Asset #07221) |
 |
997 |
1 |
GNB 24 V Forklift Charger, Model SCRFLX - 12-600SIZ, S/N 0200450S (Asset #07220) |
 |
998 |
1 |
Precision 36 V Forklift Charger, Model 3PF18B - 750EMEP, S/N 64096 (Asset #07272) |
 |
999 |
1 |
Hobart 24 V Forklift Charger, Model 540C3 - 12R, S/N 486CS 29856 (Asset #07222) |
 |
1000 |
1 |
GNB 36 V Forklift Charger, Model SCRFLX - 18-750TIZ, S/N 00J0145S (Asset #07266) |
 |
1001 |
1 |
General Electric 150 KVA Transformer, Model 9T23B3886, S/N F, 480 HV Volts, 240 LV Volts, 3 Phase |
 |
1002 |
1 |
General Electric 30 KVA Transformer, Model 9T233812, HV 240 Volt, LV 208 Volt, 3 Phase |
 |
1003 |
1 |
Acme 75 KVA Transformer, Cat #T-1A-533 44-3S, PV 480, Secondary 240-120 Hi-Leg, 3 Phase |
 |
1005 |
1 |
Contents of Office including: Desk, Steno Chair, Credenza, 4 and 5-Drawer File Cabinets, Dry Erase Board and Message Board |
 |
1007 |
1 |
(2) Desks, (2) 4-Drawer File Cabinets and 2-Drawer File Cabinet |
 |
1008 |
1 |
(2) 3-Shelf Racks - 8 ft. and 7 ft. |
|
|
1009 |
1 |
Desk, Steno Chair, Credenza, Small Computer Desks, Arm Chair and (2) Plants |
|
|
1010 |
1 |
Desk, Executive Chair, (6) Upholstered Chairs, Table, Credenza, (2) 4-Drawer File Cabinet, 2-Door Storage Cabinet, Bookshelf including (2) Additional 4-Drawer File Cabinets, (2) Printer/Computer Desks, Arm Chair and Credenza |
|
|
1011 |
1 |
Hercules Safe (NOTE: Combination Not Available) |
|
|
1012 |
1 |
(3) 2-Drawer File Cabinets |
|
|
1013 |
1 |
4-Station Modular Office System with (4) Desks, (2) Chairs, 2-Drawer File Cabinet and (1) U-Shaped Desk |
|
|
1014 |
1 |
Contents of Office including: (2) Desks, Bookshelf, Executive Chair, Arm Chair and Message Board |
|
|
1015 |
1 |
(2) Desks, (2) Chairs, Credenza, Cabinet and (4) 4-Drawer File Cabinets |
 |
1031 |
1 |
Assortment of Centrifugal and Positive Displacement Pump Parts including Cover Assemblies, Clamps, Gaskets, Impellers, Spring and Carbon Kits |
 |
1032 |
1 |
Assorted Tri-Clover and Alfa Laval Air Valve Parts including: Bodies, Plungers, Plug Valve Parts, Sample Valves, Thermometers, Lumenite Probes |
 |
1033 |
1 |
Fairbanks S/S Platform Scale, Model H905200 |
 |
1034 |
1 |
Assorted Tank Door Parts including: Gaskets, Sprayballs with Filter Parts |
 |
1035 |
1 |
All American Steam Sterilizer, Model 25X |
 |
1036 |
1 |
Orion Model 410A pH Meter with Timers and Dymotape Maker |
 |
1037 |
1 |
Colony Counter with Brinkman Emersion Heater with Pot |
 |
1038 |
1 |
Denver 300 Gram Digital Scale, Model 300, S/N 0057697 |
 |
1039 |
1 |
Toledo S/S Digital Scale, Model 3025 |
 |
1040 |
1 |
Silverstone Model 3250 S/S Digital Scale |
 |
1041 |
1 |
Toledo Model 3025 S/S Digital Scale |
 |
1042 |
2 |
Mettler Toledo Load Cells |
 |
1043 |
4 |
Vita-Rite Vitamin Pumps |
 |
1044 |
4 |
FMI Vitamin Pumps |
 |
1045 |
1 |
Garver Centrifuge, Model 224, S/N 13785 |
 |
1047 |
1 |
Nelson Commercial Refrigerator/Freezer, Model BDH-4, S/N 8908/03 |
